Lathe support - lower part - assemblies

Here you will find an extensive range of accessories for your woodturning machine. Individual parts such as supports with different tenon diameters, cast lower parts or complete assemblies. We also offer spare parts and special parts for various models - we will be happy to advise you by telephone.

Accessories for various woodturning machines

We not only offer standard accessories for the woodturning lathes from Steinert®, Hapfo® and Killinger®. We can also help you to optimize your existing woodturning lathe, retrofit it or find spare parts.

Read more...
1 From 2
No results were found for the filter!
Drechselbank steinert Unterteil Hand-/Werkzeugauflage
steinert® (Deutschland)
Tool Rest Lower Part Heavy, Shaft 40mm
for centre height 250-300mm Large version Shaft 40mm Support Rail not included
€385.00 *
Details
Hand-/Werkzeugauflage für Drechselbank steinert piccolo
steinert® (Deutschland)
Tool Rest 240mm, Shaft 25mm
for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€59.00 *
Details
Tool rest bottom part made of cast iron
Killinger®/steinert® (Taiwan/Deutschland)
Tool Rest lower part, cast iron, shank 30 mm
For center height 180 - 220 mm Bottom part tool rest made of cast iron, for woodturning machines with center height 180 mm to 220 mm. The lower part is suitable for all tool rests with shank diameter 30 mm. Please measure the distance between the cheeks on your lathe beforehand and select the appropriate variant. The lower part is fully assembled and ready for use. You only have to attach the clamping...
€144.90 *
Details
Bottom part Cast iron tool rest in heavy duty design
Killinger®/steinert® (Taiwan/Deutschland)
Tool Rest bottom part, heavy duty, shank 30 mm
for center height 220 - 260 mm Knife rest lower part in heavy cast design for rests with shank Ø 30 mm. For lathes with center height 220 mm to 260 mm. Please measure the distance between the cheeks on your lathe and then select the correct variant. We offer this lower part for lathes with cheek distance 45 mm and 70 mm. We also offer the possibility of a custom-made production for the distance between...
€168.50 *
Details
Werkzeugauflage 170 mm
Killinger®/steinert® (Taiwan/Deutschland)
Tool rest 170 mm
shaft 30 mm, center height 180-200 mm For center height 180-200 mm (depends on heigt and geometry of tool rest basis) shaft diameter 30 mm Suitable for Killinger KM 1400 SE, 1450 SE and 1500 SE lathes
€59.00 *
Details
Fußschalter für Drechselbänke und andere Maschinen
Bernstein (Deutschland)
Foot Switch with Protective Cover
as button or latching These high-quality foot switches from the German manufacturer Bernstein AG have proven themselves for many years as an additional switching element on the VB36 head lathe. In addition to the practical benefit that both hands remain free when the machine is switched off and on, a foot switch makes a significant contribution to safety when using the lathe. The accident...
From €186.70 *
Details
Freistehender Werkzeugauflageständer für Schalendrechselbank VB36 Master Bowlturner Lathe
steinert® (Deutschland)
Free Standing Tool Rest
for head lathe VB36 If workpieces with a diameter of more than 915 mm (largest possible diameter above cantilever rail) are to be machined on the VB36, this free-standing tool rest stand must be used. It is suitable for all tool supports of the VB36. The diameter of the mount is 40mm The head lathe VB36 was manufactured in 2 different heights in the past - "L" (low) and "H" (high). Since 2019,...
€620.00 *
Details
Werkzeugauflage / Handauflage
steinert® (Deutschland)
Tool rest 275 mm
Shank Ø 30/40mm Tool rest 275 mm with Shank Ø 30 / 40 mm
€205.00 *
Details
geschwungene Werkzeugauflage
steinert® (Deutschland)
Curved Tool Rest
Shank Ø: 16, 20 mm or 1" When turning hollow forms, there is often a considerable overhang of the tool over the tool support which results in unfavourable leverage. This curved tool rest can be positioned so that it protrudes into the hollow mold. There are holes on the top of the curved tool support rail; these serve to accommodate an optionally available fork guide or a guide pin. A bar lying...
€175.00 *
Details
VB36 Master Bowlturner Lathe - geschwungene Werkzeugauflage
steinert® (Deutschland)
Deep Hollowing Rest
Shank-Ø: 30 or 40 mm When turning hollow forms, there is often a considerable overhang of the tool over the tool rest resulting in unfavorable leverage. This curved tool rest can be positioned so that it protrudes into the hollow mold. There are holes on the top of the curved tool rest rail, these serve to accommodate an optionally available fork guide or a guide pin. A bar lying horizontally...
From €374.00 *
Details
Werkzeugauflage 350 mm
Killinger®/steinert® (Taiwan/Deutschland)
Tool Rest 350 mm
shaft 30 mm, center height 280-300 mm for center height 280-300 mm (depends on heigt and geometry of tool rest basis) shaft diameter 30 mm suitable for Killinger KM 3100 SE
€99.00 *
Details
Werkzeugauflageschien gebogen, längsverstellbar
steinert® (Deutschland)
Tool rest curved, Ø 150 mm, adjustable
Shank Ø 30 / 40mm Tool rest curved, Ø 150 mm, adjustable with shank Ø 30 / 40 mm
From €129.50 *
Details
Werkzeugauflage / Handauflage
steinert® (Deutschland)
Tool rest 180 mm
Shank Ø 30/40mm Tool rest 180 mm with Shank Ø 30 / 40 mm
€185.00 *
Details
Werkzeugauflage / Handauflage
steinert® (Deutschland)
Tool rest 1000 mm incl. second lower part
2 x shaft Ø 30 or 40mm For long turned parts. Available with 2 x shank Ø 30 or 2 x shank Ø 40 mm. Please select.
€640.00 *
Details
Handauflageschiene / Werkzeugauflageschiene
steinert® (Deutschland)
Tool Rest rail 130, 200, 300 or 400mm
without shaft Very stable tool rest made of vibration-damping grey cast iron. The tool rest is provided with an M16 hole into which the shaft for the tool rest is screwed (available seperately) The height of the tool rest rail is 110mm. Before ordering, please check whether this size fits your machine. Note that the upper edge of the rail should be at least 10mm below the axis of...
From €61.50 *
Details
Schaft für Handauflageschiene/Werkzeugauflageschiene
steinert® (Deutschland)
Shank for Tool Rest
Shank Ø: 30 or 40mm For use on the VBT tool rest rails without a shaft. If the palm rest is used on one machine, the shaft can be glued in. If the tool rest is to be used on multiple machines with different tool rest shank diameters, the shank is not glued and can be changed. Thread: M16 Thread length: 23mm
From €24.90 *
Details
Hand-/Werkzeugauflage für Drechselbank steinert piccolo
steinert® (Deutschland)
Tool Rest 120mm, Shaft 25mm
for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€59.00 *
Details
VB36 Master Bowlturner Lathe - Firmager Pin
steinert® (Deutschland)
Melvyn Firmager Guide Pin
for VB36 tool rest All VB36 tool supports are provided with threaded holes. This guide pin can be screwed horizontally into the threaded hole. It is very helpful for certain work to enable you to guide the tool more cleanly and precisely.
€12.00 *
Details
Handauflage gebogen
steinert® (Deutschland)
Curved Tool Rest
for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€85.00 *
Details
VB36 Master Bowlturner Lathe - Gabelführung
steinert® (Deutschland)
Forked Rest
for Deep Hollowing Rest VB36 An accessory for the curved tool support rail of the VB36 Serves to guide the tool in deeply turned workpieces
€29.00 *
Details
VB36 Master Bowlturner Lathe - Stiftführung
steinert® (Deutschland)
Short Fulcrum Pin
for Deep Hollowing Rest VB36 An accessory for the curved tool support rail of the VB36 Serves to guide the tool in deeply turned workpieces
€12.00 *
Details
Werkzeugauflage / Handauflage
steinert® (Deutschland)
Tool rest 425 mm
Shank Ø 30/40mm Tool rest 425 mm with Shank Ø 30 / 40 mm
€225.00 *
Details
Hand-/Werkzeugauflage für Drechselbank steinert piccolo
steinert® (Deutschland)
Tool Rest 160mm, Shaft 25mm
for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm This tool rest is part of the standard equipment of the steinert® piccolo.
€59.00 *
Details
Long Boom
steinert® (Deutschland)
Long Boom
for free-standing tool support stands 2 x support feet for additional stabilisation of the free-standing tool rest stand
€145.00 *
Details
1 From 2

Questions about lathe assemblies

Do you have a "home-made" brand at home and need components?
Or do you own another brand such as Stratos, Holzstar or Geiger?

No problem, we also take care of other brands and very special cases.

A good example of this is the lower part of the tool rest assembly from Killinger. The simple clamping mechanism allows us to adapt the component according to specifications. This means that the distance and height of the cheeks are rarely an obstacle for us. Production is individually coordinated with the customer.

If, on the other hand, you need a new tool rest, we can offer you many different components, each with different tenon diameters. For wood turners who tend to work on smaller projects, we offer, for example, the price-performance winner from Killinger or Made in Germany from Steinert. These supports are available with Ø 30 mm and Ø 40 mm mounts. However, if you require inch dimensions, we can provide various reducing sleeves. If the specification is very specific, the only solution is to have it adapted by our steinert mechanical engineering department.

These are just examples. If you have any questions about custom-made products or conversions, simply give us a call. Our specialist staff will be happy to advise you on accessories and assemblies for lathes.

back to top...
You have last looked at the following articles: