steinert® piccolo

No results were found for the filter!
Tisch-Drechselbank steinert piccolo Super
steinert® (Deutschland)
Steinert® piccolo Super Table Lathe
Grey cast iron lathe Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile face turning and the amateur has a fully-fledged,...
€3,210.00 *
Details
Drechselbank steinert piccolo SuperProfi
steinert® (Deutschland)
Steinert® piccolo SuperProfi Table Lathe
Grey cast iron lathe with back bearing Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to the solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile shuddering turning and the amateur has a...
€3,310.00 *
Details
Drechselbank steinert piccolo Vario
steinert® (Deutschland)
Steinert® piccolo Vario Table Lathe
Turning lathe made of grey cast iron with movable headstock Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile face turning, and the amateur has a fully-fledged,...
€3,420.00 *
Details
Antriebseinheit
steinert® (Deutschland)
Steinert Piccolo Vario Drive Unit
Universal drive for individual use in industry and trade. The device is equipped with a standard spindle thread M33x3.5 and an inner cone MK2 and can be equipped with a variety of clamping devices for different applications. 3-stage belt transmission Spindle thread M33x3.5 Inner cone MK2 Hollow shaft Ø 11mm Axle height 160mm Aluminium base plate 350 x 440 x 10mm Motor 400v,...
€2,320.50 *
Details
Centre Height 180mm
steinert® (Deutschland)
Centre Height 180mm
for the Steinert® piccolo lathe The centre height 180mm enables a maximum turning diameter of 360mm. Must be ordered with the machine. Retrofitting is not possible or only possible with great effort.
€125.00 *
Details
Centre Height 180mm with Rotating Headstock
steinert® (Deutschland)
Centre Height 180mm with Rotating Headstock
only for the Steinert® piccolo Vario lathe The rotating headstock is only compatible with the piccolo Vario, with a centre height of 180mm. Must be ordered with a machine. Retrofitting is not possible.
€169.00 *
Details
Tischdrechselbank steinert piccolo Bankbett-Verlängerung
steinert® (Deutschland)
Bench Bed Extension 700mm
for the Steinert® piccolo lathe The bench bed extension consists of a second grey cast iron bench bed, which is precisely adapted to the machine. This results in a tip width of 1000mm. The extension can be removed if necessary. The extension must be ordered with the machine. Later retrofitting is only possible with great effort. *The long tool support rail in Figure 2 is not part of the bench bed extension.
€385.00 *
Details
Tischdrechselbank steinert piccolo Untergestell aus Holz
steinert® (Deutschland)
Wooden Base Frame
for the Steinert® piccolo lathe Solid wood glazed, carpentry work base. Demountable and very stable Length 114 cm x width 57 cm x height: 80 cm
From €349.00 *
Details
Hand-/Werkzeugauflage für Drechselbank steinert piccolo
steinert® (Deutschland)
Tool Support 120mm, Shaft 25mm
for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€59.00 *
Details
Hand-/Werkzeugauflage für Drechselbank steinert piccolo
steinert® (Deutschland)
Tool Support 160mm, Shaft 25mm
for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm This tool support is part of the standard equipment of the steinert® piccolo.
€59.00 *
Details
Hand-/Werkzeugauflage für Drechselbank steinert piccolo
steinert® (Deutschland)
Tool Support 240mm, Shaft 25mm
for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€59.00 *
Details
Lange Werkzeugauflage für Tischdrechselbank steinert piccolo
steinert® (Deutschland)
Tool Support 400mm inc. Second Lower Part
for the Steinert® piccolo lathe Shank diameter 2 x 25mm For centre height 150mm or 180mm Including second lower part
€265.00 *
Details
Handauflage gebogen
steinert® (Deutschland)
Curved Tool Support
for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€85.00 *
Details
Längskopier-Vorrichtung für Drechselbank steinert piccolo und Fremdfabrikate
Hager (Deutschland)
Copy Device for Spindle Copying
for the Steinert® piccolo lathe Optimized for our steinert® piccolo lathe. Technical specifications: Maximum working length 320mm Stable substructure (steel plate 350 x 300 x 10mm) with 2 height-adjustable shafts Ø 30mm Probe for pointed steel and bell knives Operating from left and right side Stencil infeed on both sides Adjustable plexiglass protection For center heights from 180 to 240mm (other center...
€1,122.00 *
Details
Copy Device for Spindle Copying
Hager (Deutschland)
Copy Device for Spindle Copying
for the Steinert® piccolo lathe Optimized for our steinert® piccolo lathe. Technical specifications: Maximum working length 320mm Stable substructure (steel plate 350 x 300 x 10mm) with 2 height-adjustable shafts Ø 30mm, probe for pointed steel and bell knives Operating from left and right side Stencil infeed on both sides Adjustable plexiglass protection For center heights from 180 to 240mm (other center...
€8.35 *
Details
Tischdrechselbank steinert piccolo Bohr- und Fräsgerät
Hager (Deutschland)
Drilling and Milling Machine DB 190
for the steinert® piccolo lathe and other makes For insertion into the lower part of the hand rest Travel path 190mm, depth stop on both sides Maintenance-free adjustable special guide Shaft Ø 25mm with milled anti-twist device Height adjustment via adjusting ring Euro mount 43mm Upper slide rotatable for milling work Milling Motor and lower part of the hand rest not included The Metabo Milling Motor FME737 is compatible...
€238.00 *
Details
Tischdrechselbank steinert piccolo Lünette
steinert® (Deutschland)
Steady Rest - Small
for the steinert® piccolo lathe and other makes With individually adjustable rollers, swiveling Possible to adapt to other makes of lathe
From €398.00 *
Details
Schiebepinole zum Nachrüsten für Drechselbank steinert piccolo
steinert® (Deutschland)
Quill Sliding Pin Retrofit Kit
For wood lathe steinert® piccolo from year of construction 2017 In contrast to the standard quill, this sliding quill has a longer quill stroke of 120 mm and lever feed instead of the handwheel. Such a design, also known as a drill quill, is suitable if a lot of drilling is to be carried out. This is useful, for example, in the manufacture of writing implements. Deep holes can be drilled “in one go” without having to reposition the...
€295.00 *
Details
Tischdrechselbank steinert piccolo Schleiftisch
steinert® (Deutschland)
Sanding Table with Plywood Support, 25mm Shaft
for the Steinert® piccolo lathe and other makes Dimensions: 200 x 120 mm
€64.50 *
Details
Schleifteller Ø 250 mm, M33x3,5
steinert® (Deutschland)
Sanding pad Ø 250 mm, M33 x 3.5
made of aluminium Flat surface for attaching self-adhesive sanding pads for spindle thread M33x3.5
€129.65 *
Details
Viewed