Microclene Air Filter MCP

Exchange of 120m³ air / hour (for pyrography)

Microclene Luftfilter MCP für Brandmalerei und Lötarbeiten
€223.23 *

Prices incl. VAT plus shipping costs

only 1 in stock available immediately

Voraussichtlicher Versand morgen, 02.12.2020
  • 083100
The MCP was specially developed for pyrography and soldering. The air filter is placed on the... more
Product information "Microclene Air Filter MCP"
The MCP was specially developed for pyrography and soldering. The air filter is placed on the workbench or work table near the workpiece to be processed.
  • Filters 120 m³ air per hour
  • 240 volts / 35 watt
  • Size 200 x 150 x 170mm
  • Double filter (G4 dust and carbon filter) in one cartridge, easy to change
Test report about the MCP filter in the Woodturning magazine click here ... (pdf approx. 0.16 MB)
Please note: The Microclene air filters are designed as filters to eliminate the finest, harmful micro-dusts in the air. The Microclene air filters are not dust extractors and are not suitable for the direct extraction of grinding dust on the lathe or on a grinding machine.

Frequently asked questions about the Microclene air filters:
How often does the filter have to be changed?
This of course depends on the use. Most customers change the filters 2 to 4 times a year. A small test before using the filter in the work area shows whether the filter is full and needs to be changed. To do this, switch on the Microclene air filter and take a piece of paper that is large enough to cover the suction opening area of the air filter (except for the MC280 filter, a sheet of A4 size is sufficient). If the sheet of paper is sucked in and gets stuck, the suction force of the air filter is still sufficient. If the sheet is not sucked in and falls, the filter is dirty and needs to be changed.
Can the filter be washed out and reused?
No. The fine filter material would change its structure when washed out and would no longer be able to work in accordance with standards. However, the filters can be mechanically cleaned 2-3 times, i.e. carefully knocked out.
What is the power consumption of the devices?
The devices are equipped with energy-saving motors. The small filter MC200 is operated with 53 watts, MC420 with 60 watts, MC1210 with 90 watts and the MC760 / 780 has 100 watts of power.
Where are the filters attached / set up?
MC200 can be placed directly on the workbench or in the immediate vicinity of the workplace. MC420 and MC1210 are hung from the ceiling in the middle of the room. The MC280 with LED lighting is placed directly above the dust source, i.e. the workbench. The MC760 / 780 is suitable for mounting on the wall or as a stand-alone device. The pyrography filer MCP should also be set up in the immediate vicinity of the workplace. It should also be noted that the hanging devices are hung on at least 2 hooks, as they always turn a little when switched on. A single hook could loosen over time.

Fine dust of any kind is dangerous to health. This also includes the finest wood dust. With some types of wood, cancer is even suspected. Fine grinding dust remains in the air for hours as an "invisible danger". Even ventilation or wearing dust masks does not provide sufficient protection here. Microclene air filters filter all room air 10 to 50 times per hour, depending on the type and room volume. The finest dust particles with a size of less than 1 micron (= 1 thousandth of a millimeter) are reliably filtered out. Microclene air filters are not only suitable for removing wood dust. Metal dust, pollen, textile fibers, cement dust, fungal spores and much more are also removed from the room air.
Thor and Microclene air filters, suitable room volumes
Image: Number of filtered air volumes per hour depending on the filter type and room size. The areas marked in green show the suitability of the respective type for the corresponding room size.
Related links to "Microclene Air Filter MCP"
Read, write and discuss reviews... more
Customer evaluation for "Microclene Air Filter MCP"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following field for security reasons.

The fields marked with * are required.

Dechselbank HAPFO Performer 400-FU Steinert® VGM300 Lathe
From €7,700.00 *
Planscheiben-Ring Typ A Faceplate Rings
From €14.87 *