steinert® Joker 7000

Wood copy lathe

€116,000.00 *

Prices incl. VAT plus shipping costs

currently not in stock

Delivery time / availability on request

  • joker7000
steinert® JOKER 7000 fits in well with our company's product range and marks the beginning of a... more
Product information "steinert® Joker 7000"

steinert® JOKER 7000 fits in well with our company's product range and marks the beginning of a completely new generation of hydraulic copy lathes. Special advantages are: 

  • The copy support and copy slide run on hardened and ground ball track guides
  • The copy turning tools are also very close to the rotating bezel on the double copy support
  • The various steady rests and accessories can be retrofitted at any time. This means that the machine can be adapted to changing requirements in the workshop
  • The drive for the support feed is attached to the rear of the machine. As a result, there is a lot of space and complete freedom of movement on the operating side
  • The operating and control elements are combined on an accompanying control panel. All cables and lines are combined in a trouble-free and space-saving energy chain
  • The template can be adjusted from the front as well as from the rear using fine-thread spindles
  • Pre-roughing and copying turning tools are provided with precision settings. The most precise turning diameters are guaranteed by precision depth setting spindles
  • Round bezels with different insert rings are also part of the equipment options, as are continuously adjustable four-jaw bezels
  • The infinitely variable spindle speed enables the best speed to be set quickly and thus guarantees the best possible turning quality
  • The copying process is also possible in reverse. As a result, when the square timber blanks are cut to size accurately, work can be carried out completely free of tears and losses
  • The tailstock quill is available with a toggle quick-release version
  • The particularly heavy cast bed is absolutely torsion-free
  • The machine is available as a single and a double copier, but can also be used as a hand lathe

 

TECHNICAL SPECIFICATIONS:

  • Distance between centres: 1600mm. Copy length with bezels and a copy support 1500mm. Copy length with bezel and two copy supports (double copier) 1450mm
  • Centre height: 250 + 300mm largest turning diameter over copying slide 280mm or 330mm
  • Feed: infinitely variable, rapid return with safety shutdown
  • Copy carriage: hydraulic, stroke 100mm or 150mm. The entire copy carriage can also be adjusted in its basic travel, so that it is possible to work in very different sized diameter ranges
  • Spindle: M33 with collar D35mm, inner cone Mk3. Hollow spindle with a 14mm diameter bore, with reinforced triple bearings through precision angular contact ball bearings
  • Tailstock: eccentric quick clamping and safety bench clamping, quill Mk2. Quill stroke 150mm. With adjustable toggle lever quick release on request
  • Bezel: Ring bezel for diameters from 15 - 75mm with quick-change insert rings; three four-jaw bezels, continuously adjustable, for diameters of 30 - 60mm, 60 - 100mm, 120 - 180mm
  • Extraction: bezel ring and copy side each D 100mm
  • Spindle motor: three-phase current 2.2 KW optionally up to 3.0 KW. Speed continuously adjustable in two ranges: 200-2000rpm or 350 - 3400rpm
  • Hydraulic pump motor: 0.37 KW
  • Electrics: Safety electrics according to VDE, motor protection according to IP54
  • Voltage: 400/230v / 3PE / N / 50 Hz (special voltage available upon request)
  • Total power requirement: maximum 3 KW or 4 KW
  • Dimensions: L 2550, W1300, H1200mm
  • Weight: 700kg

Related links to "steinert® Joker 7000"
Read, write and discuss reviews... more
Customer evaluation for "steinert® Joker 7000"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following field for security reasons.

The fields marked with * are required.

Viewed