Wood Hardener 0.5 / 1.0 / 2.5Ltr

A "must" for tear-free surfaces! From practice for practice.

 

Also ideal as a quick sanding primer.

 

Colourless product for stabilising and strengthening wooden surfaces. Excellent for consolidating fiber tears on bush-hammered and soft-fiber woods. It does not replace the correct working technique and is also not a miracle cure, but when used correctly it makes the processing of problematic areas on the wood much easier. The result is time and cost savings as well as a flawless surface.

Special features:

 

• Wood-setting and quick-drying sanding base = 2 in 1
• Dries quickly and without changing color
• Penetrates deep into the wood. Shellac, wax etc.
• Reduced drying time

 

Apply Holz-Festiger generously to the fibers or fiber tears with a brush while the machine is at a standstill. Drying time 10 to 20 minutes depending on the ambient temperature. Then turn it over slightly. (The application is particularly useful before the "last cut" with a sharp tool.) Carry out grinding and finishing as usual.

 

Apply a thin layer of wood hardener to the entire surface of the workpiece (the surface should be ready for sanding). Dries up extremely quickly. Then sand as desired. The surface is - even without final treatment - by intermediate sanding with z. B. finest steel wool (0000) already shiny silk matt. Perform final treatment as desired.

 

Wash out the brush with spirit. Always close the bottle. Store as frost-free as possible.

 

Safety instructions:
Highly flammable! Keep out of the reach of children. Keep container tightly closed. Keep away from sources of ignition - No smoking. UN 1263 color, 3, VP II. WGK: slightly hazardous to water.