Special offer at the start of the month

The entry-level model (with or without electronic control) The entry-level model for demanding hobbyists. Simple and powerful, especially at fine work. The Multicut-1 is available with or without stepless speed control (please select) . Scroll saws from Hegner are considered to be the most precise fine cut saws in the world due to their quality and stability. The machines are suitable for professional woodworking and metal cuttings...

Multipoint, 3MT Driver with resilient tip and a ring of driver teeth suitable for the series production of long wood work the workpiece can be clamped while the machine is running eccentric work can be carried out between the tips tip can be attached to different points off-centre stebcenter with 3MT are only available in Ø 32 mm Size of the MT morse taper: largest diameter in mm smallest...

Spindle thread: M33 x 3.5 Spindle thread: M33x3.5 (other threads possible on request)

10kt gold-plated (A logo) Picture shows exemplary embodiment. The kit does not contain a wooden or plastic blank (pen blank) for production. 10kt gold, 0.5 mm fine lead, Artisan "A" logo on the clip Technical information on post production: Drill size: Ø 7mm Mandrel required: yes Spacer rings for mandrel: 1 set of spacer rings type 07 (standard rings for the Axminster mandrel item no. ax340198 /...

gold Picture shows exemplary embodiment. The kit does not contain a wooden or plastic blank (pen blank) for production. Noble, gold-plated twist ballpoint pen with a decorated central band, soft rubber tip on the back for touch screens. Technical information on pen manufacture: Drill size: Ø 10.72mm (27 / 64") Mandrel required: yes Spacer rings for mandrel: 1 set of spacer rings...

Burnished (gun metal) and gold Picture shows exemplary embodiment. The kit does not contain a wooden or plastic blank (pen blank) for production. Attractive design Burnished metal (gun metal) and gold Decorated central band Easy production Technical information on pin manufacture: Drill size: Ø 27/64" (10.72)mm Mandrel required: yes Spacer rings for mandrel: 1 set of spacer rings type 20

5 pieces for small hollow vessels Contents: Mini plate steel 6mm Mini scraper left rounded 10mm Mini unscrewing hook Mini round chisel 3mm Mini round chisel 6mm Blade length: 10cm Total length including handle: 26cm

13 or 19mm Dimensions: B842136 manufacturer's specification: 13 mm; diameter: 16 mm; overall length: 650 mm B842194 Manufacturer's specification: 19 mm; Diameter: 22 mm; Total length: 650 mm Please select the desired size!

600mm A number of special tools have been developed to make the turning of hollow shapes, which are becoming increasingly common, much easier. Curved gouges are used for workpieces where the hole diameter is (much) smaller than the inside diameter. Straight gouges are used for the deeper parts of these workpieces.

offset shaft The Hollowmaster is the perfect complement to the Multi Tip Hollowing Tool. It utilizes the same unique design of a fleshy ¾-inch flat shank that, when placed on the tool rest, provides enough grip to prevent the tool from being turned over by the rotation of the wood. Instead of fighting the wood, it removes it with ease. Thanks to its gooseneck design, the Hollowmaster...

Shaft Ø 13mm

13mm Dimensions: B840062 Manufacturer's specification: 13 mm; Diameter: 16 mm

19 mm Dimensions: SOV-842-19 Manufacturer's specification: 19 mm; Diameter: 23 mm Nominal dimension 19 mm = outer dimension 23 mm = inner dimension 15 mm Please select the desired size!

6mm Dimensions: SOV-842F-06 Manufacturer's specification: 6 mm; Diameter: 14 mm

19mm, flat shaft Dimensions: SOV-843190 Manufacturer's specification: 19 mm; Width: 29 mm

with 2, 4, 5 or 6mm tooth spacing Please select the size you desire. Already included in the scope of delivery of the spiraling tool set . Application example

Sharpening aid for turning tools and other tools Auxiliary sharpening device for turning tools and other tools for mounting on a bench grinder. The guide table shown in the pictures, the device for grinding pipes and the device for grinding chisels are not included in the scope of delivery (item no .: W447JAT, WPESKEW, WPESQ) and must be ordered separately.

2 half-shells For reliably securing the chuck and workpiece against running off / turning off when running clockwise / counterclockwise and when braking heavily. Balanced variant for vibration-free rotation. Suitable for M33 x 3.5 lathes and chucks with safety groove in EURO standard (ASR). Positive-locking discharge safety devices are significantly more gentle on the material than...

This centring device is suitable for marking the centre of rectangular, round, square and oval shapes. The device is based on the geometry of a parallelogram. The corners are connected by movable hinges. The workpiece to be traveled is simply enclosed with two opposite corners and the centre point is marked with a centre punch. Possible dimensions: Square cross-sections:...

Exchange of 1200m³ air / hour With a filter volume of 1200m³ / h, the TF1260 can filter workshops with a room volume of up to 120 m³ approx. 10 times per hour. The high construction is only suitable for higher rooms. Filters 1200m³ of air per hour, 240v / 90 watts Length: 300mm, Ø: 305mm Weight: approx. 8kg Volume: approx. 61dB Filter class EU4 / G4 according to EN 779 Please note: The Microclene air...

Sharpening aid for all turning tools Sharpening aid WOODCUT TruGrind for wet grinders with 12mm support bar (e.g. Tormek). Sharpening aid for easy sharpening on wet grinders consisting of tool holder and base plate. Numbered notches on the tool holder allow different sharpening angles. For sharpening turning tools (including miniature tools), carving and carpentry tools.

with threaded flange (various threads) and base jaws for Axminster attachments With threaded flange and base jaws for Axminster attachments. Please select the desired spindle thread when ordering! The variant spindle mount M33 x 3.5 Euro ASR is equipped with the standardized groove for the use of drain protection shells. The lathe also requires this standardized groove in the spindle. Spindle threads other than those listed in the selection are...

6-Point, 3MT - for large copier machines diameter 39mm total length with morse taper: 220mm Size of the MT morse taper: largest diameter in mm smallest diameter in mm 3MT 24.05 19.76

Ø 2 to 12mm For manual drilling of wood and similar materials Threaded tip for self-closing Suitable for softwood and European hardwood Deep groove for good chip ejectionGgood hold for screws due to slightly conical shape Suitable for children Please choose the desired size! Available sizes: Ø 2mm - total length: 90mm, effective length/drilling depth: 40mm Ø 3mm - total length: 110mm,...