No results were found for the filter!
steinert® (Deutschland)
Tool Rest Lower Part Heavy, Shaft 40mm for centre height 250-300mm Large version Shaft 40mm Support Rail not included
€385.00 *
steinert® (Deutschland)
Tool Rest 240mm, Shaft 25mm for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€59.00 *
Killinger®/steinert® (Taiwan/Deutschland)
Tool Rest lower part, cast iron, shank 30 mm For center height 180 - 220 mm Bottom part tool rest made of cast iron, for woodturning machines with center height 180 mm to 220 mm. The lower part is suitable for all tool rests with shank diameter 30 mm. Please measure the distance between the cheeks on your lathe beforehand and select the appropriate variant. The lower part is fully assembled and ready for use. You only have to attach the clamping...
€144.90 *
Killinger®/steinert® (Taiwan/Deutschland)
Tool rest 170 mm shaft 30 mm, center height 180-200 mm For center height 180-200 mm (depends on heigt and geometry of tool rest basis) shaft diameter 30 mm Suitable for Killinger KM 1400 SE, 1450 SE and 1500 SE lathes
€59.00 *
Axminster (England)
Tool rest with hardened round steel different lengths Standard tool rest with welded-on hardened steel rod. This ensures that your tool glides effortlessly while turning and that there are no notches or damage to the sliding face. The concave shape of the support ensures a better grip and allows the turning tool to be controlled better. Internal thread tool rest: M12 x 1.25mm Centering hole: 15.5mm Total height: 55mm Compatible...
From €19.80 *
Bernstein (Deutschland)
Foot Switch with Protective Cover as button or latching These high-quality foot switches from the German manufacturer Bernstein AG have proven themselves for many years as an additional switching element on the VB36 head lathe. In addition to the practical benefit that both hands remain free when the machine is switched off and on, a foot switch makes a significant contribution to safety when using the lathe. The accident...
From €186.70 *
steinert® (Deutschland)
Free Standing Tool Rest for VB36 lathe If workpieces with a diameter of more than 915 mm (largest possible diameter above cantilever rail) are to be machined on the VB36, this free-standing tool rest stand must be used. It is suitable for all tool supports of the VB36. The diameter of the mount is 40mm The head lathe VB36 was manufactured in 2 different heights in the past - "L" (low) and "H" (high). Since 2019,...
€620.00 *
steinert® (Deutschland)
Tool rest 275 mm Shank Ø 30/40mm Tool rest 275 mm with Shank Ø 30 / 40 mm
€205.00 *
steinert® (Deutschland)
Curved Tool Rest Shank Ø: 16, 20 mm or 1" When turning hollow forms, there is often a considerable overhang of the tool over the tool support which results in unfavourable leverage. This curved tool rest can be positioned so that it protrudes into the hollow mold. There are holes on the top of the curved tool support rail; these serve to accommodate an optionally available fork guide or a guide pin. A bar lying...
€175.00 *
steinert® (Deutschland)
Deep Hollowing Rest Shank-Ø: 30 or 40 mm When turning hollow forms, there is often a considerable overhang of the tool over the tool rest resulting in unfavorable leverage. This curved tool rest can be positioned so that it protrudes into the hollow mold. There are holes on the top of the curved tool rest rail, these serve to accommodate an optionally available fork guide or a guide pin. A bar lying horizontally...
From €374.00 *
Killinger®/steinert® (Taiwan/Deutschland)
Tool Rest 350 mm shaft 30 mm, center height 280-300 mm for center height 280-300 mm (depends on heigt and geometry of tool rest basis) shaft diameter 30 mm suitable for Killinger KM 3100 SE
€99.00 *
steinert® (Deutschland)
Tool rest curved, Ø 150 mm, adjustable Shank Ø 30 / 40mm Tool rest curved, Ø 150 mm, adjustable with shank Ø 30 / 40 mm
From €129.50 *
steinert® (Deutschland)
Tool rest 180 mm Shank Ø 30/40mm Tool rest 180 mm with Shank Ø 30 / 40 mm
€185.00 *
steinert® (Deutschland)
Tool rest 1000 mm incl. second lower part 2 x shaft Ø 30 or 40mm For long turned parts. Available with 2 x shank Ø 30 or 2 x shank Ø 40 mm. Please select.
€640.00 *
steinert® (Deutschland)
Tool Rest rail 130, 200, 300 or 400mm without shaft Very stable tool rest made of vibration-damping grey cast iron. The tool rest is provided with an M16 hole into which the shaft for the tool rest is screwed (available seperately) The height of the tool rest rail is 110mm. Before ordering, please check whether this size fits your machine. Note that the upper edge of the rail should be at least 10mm below the axis of...
From €75.50 *
steinert® (Deutschland)
Shank for Tool Rest Shank Ø: 30 or 40mm For use on the VBT tool rest rails without a shaft. If the palm rest is used on one machine, the shaft can be glued in. If the tool rest is to be used on multiple machines with different tool rest shank diameters, the shank is not glued and can be changed. Thread: M16 Thread length: 23mm
From €24.90 *
steinert® (Deutschland)
Tool Rest 120mm, Shaft 25mm for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€59.00 *
steinert® (Deutschland)
Melvyn Firmager Guide Pin for VB36 tool rest All VB36 tool supports are provided with threaded holes. This guide pin can be screwed horizontally into the threaded hole. It is very helpful for certain work to enable you to guide the tool more cleanly and precisely.
€12.00 *
steinert® (Deutschland)
Curved Tool Rest for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€85.00 *
steinert® (Deutschland)
Forked Rest for Deep Hollowing Rest VB36 An accessory for the curved tool support rail of the VB36 Serves to guide the tool in deeply turned workpieces
€29.00 *
steinert® (Deutschland)
Short Fulcrum Pin for Deep Hollowing Rest VB36 An accessory for the curved tool support rail of the VB36 Serves to guide the tool in deeply turned workpieces
€12.00 *
steinert® (Deutschland)
Tool rest 425 mm Shank Ø 30/40mm Tool rest 425 mm with Shank Ø 30 / 40 mm
€225.00 *
steinert® (Deutschland)
Tool Rest 160mm, Shaft 25mm for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm This tool rest is part of the standard equipment of the steinert® piccolo.
€59.00 *
You have last looked at the following articles: