HAPFO - wood lathe since 1975

The brand hapfo® can look back on several decades of experience in development, production and worldwide sales and service of manual woodturning machines and fully automatic woodturning machines in Mindelheim (Bavaria). At the end of 2020, steinert® Maschinenbau took over the traditional brand and has since been manufacturing and developing the hapfo® machines in Olbernhau, Saxony.

No results were found for the filter!
Dechselbank HAPFO Performer 400-FU
hapfo®/steinert® (Deutschland)
HAPFO Performer 400-FU Lathe
Distance between centres 1000 mm, Max diameter over bed 800 mm Designed for the professional user, the PERFORMER 400-FU presents all technical advantages which are characteristic for an efficient wood turning lathe. With a centre height of 402mm, and the swiveling headstock there are all possibilities to realise extraordinary artwork. Characteristics: • Headstock can be swiveled and moved all over the bed • headstock made of cast iron •...
From €8,699.00 *
Details
HAPFO Performer 400-FU Lathe
hapfo®/steinert® (Deutschland)
HAPFO Performer 400-FU Lathe
Distance between centres 2000 mm, Max diameter over bed 800 mm Designed for the professional user, the PERFORMER 400-FU presents all technical advantages which are characteristic for an efficient wood turning lathe. With a centre height of 402mm, and the swiveling headstock there are all possibilities to realise extraordinary artwork. Characteristics: • Headstock can be swiveled and moved all over the bed • headstock made of cast iron •...
From €9,570.00 *
Details
WSV 2024
Kugeldrehvorrichtung HAPFO KPF-400
hapfo®/steinert® (Deutschland)
Ball turning device hapfo® KPF-400
with carbide insert and HSS cup steel for balls with Ø up to 650 mm The hand rest or tool rest lower part of the PERFORMER 400-FU can be used. Optionally for other makes, the ball turning attachment KPF-400 can also be ordered with hand rest lower part. Please select! The ball turning attachment KPF-400 has been specially developed for the hapfo PERFORMER 400-FU (center height 402 mm) and adapted to the dimensions and forces of this machine....
From €1,920.00 *
Details
WSV 2024
Werkzeugauflage hapfo 275 mm
hapfo®/steinert® (Deutschland)
Tool Rest hapfo 180, 275 or 425 mm
Please select the desired length! Tool rest upper part suitable for woodturning lathe hapfo Performer with 402 cm center height in combination hapfo tool rest lower part good gliding of the tool due to high quality grey cast iron convex for optimal adaptation to the tool angle hollow shaped for better accessibility 30 mm shank diameter, approx. 150 mm shank length
From €138.22 *
Details
WSV 2024
Indexing device HAPFO
hapfo®/steinert® (Deutschland)
Indexing device HAPFO
with locking pin holder The standard handwheel can be exchanged with a handwheel. With integrated index plate with 24 pitches. To find the different positions the face plate is marked with pitches of 3/4/6/8/24.
€189.50 *
Details
WSV 2024
Lünette Hapfo Performer
hapfo®/steinert® (Deutschland)
Steady Rest HAPFO
for workpiece Ø 10 to 470 mm The HAPFO steady rest is designed for the HAPFO Performer 400-FU lathe, but can also be used for other lathes. The 3 steady rest arms can be rotated and they are slidably attached to the stable round steel body of the steady rest. This allows the arms to be freely positioned in all directions. This means that the steady rest adapts perfectly to any workpiece Ø from 10 to 470...
€1,140.00 *
Details
Ersatz-Rollenarm für Lünette Hapfo Performer
hapfo®/steinert® (Deutschland)
Steady Rest HAPFO
for workpiece Ø 10 to 470 mm The HAPFO steady rest is designed for the HAPFO Performer 400-FU lathe, but can also be used for other lathes. The 3 steady rest arms can be rotated and they are slidably attached to the stable round steel body of the steady rest. This allows the arms to be freely positioned in all directions. This means that the steady rest adapts perfectly to any workpiece Ø from 10 to 470...
€215.00 *
Details
Lünette HAPFO selbstzentrierend
hapfo®/steinert® (Deutschland)
hapfo® Steady rest self centering
for workpiece Ø 10 to 470 mm The 3 steady rest arms can be opened and closed simultaneously in a self-centering manner by means of a lever. The steady rest accommodates workpiece Ø from 12 to 80 mm. This self-centering steady rest was originally designed for HAPFO lathes and is now also available for other makes. The basic version for center height 250 mm is usually in stock. For other center heights we...
From €959.00 *
Details
WSV 2024
klappbare, formschlüssige Ablaufsicherung
hapfo®/steinert® (Deutschland)
Form-Fitting Reverse Locking Device
2 foldable half-shells For reliably securing the chuck and workpiece against running off / turning off when running clockwise / counterclockwise and when braking heavily. Foldable variant for easy assembly. Suitable for M33 x 3.5 lathes and chucks with safety groove in EURO standard (ASR). Positive-locking discharge safety devices are significantly more gentle on the material than non-positive...
€49.00 *
Details
WSV 2024
hapfo Balancer, Planscheibe mit verstellbaren Auswuchtscheiben
hapfo®/steinert® (Deutschland)
hapfo Balancer
M33 x 3.5 face plate with balancing washers Face plate with adjustable balancing discs for spindle thread M33 x 3.5 The hapfo-BALANCER is a faceplate with integrated, adjustable balancing discs, which enables significantly higher speeds, especially when processing unbalanced wet wood blanks or eccentrically clamped workpieces. It is also suitable for smaller machines, which otherwise only allow minimal speeds without...
€209.00 *
Details
WSV 2024
hapfo Balancer, Planscheibe mit verstellbaren Auswuchtscheiben
hapfo®/steinert® (Deutschland)
hapfo Balancer
M33 x 3.5 face plate with balancing washers Faceplate with adjustable balancing discs without thread. Threaded inserts from Oneway's Stronghold lathe chuck can be used. This thread insert is NOT included and must be ordered separately. The hapfo-BALANCER is a faceplate with integrated, adjustable balancing discs, which enables significantly higher speeds, especially when processing unbalanced wet wood blanks or...
€198.00 *
Details
Hapfo Balancer Gewindeverlängerung
hapfo®/steinert® (Deutschland)
hapfo® Balancer M33 thread extension
M33 x 3.5 with balancing washers M33 x 3.5 thread extension with adjustable balancing disks for spindle thread M33 x 3.5 This hapfo-BALANCER thread extension with integrated adjustable balancing disks enables significantly higher speeds, especially when processing unbalanced wet wood blanks or eccentrically clamped workpieces. It is also suitable for smaller machines that would otherwise only allow minimum...
€219.00 *
Details
Special paint
steinert® (Deutschland)
Special paint
for Steinert and Hapfo lathes We implement special color requests for our Steinert and HAPFO lathes. It should be noted that we do not have any accessories (e.g. tool supports) in stock for special colors. Subsequent procurement in a special color is associated with a considerable additional price.
€620.00 *
Details
WSV 2024
Ersatz-Tassenstahl HSS Ø 16 mm
Cup Tool 16 mm
for hapfo KPF-400
€22.80 *
Details
WSV 2024
Ersatzschraube - Spantiefenbegrenzer Kugeldrehvorrichtung KPF-400
Screw for Cup Tool
for Hapfo KPF-400
€24.30 *
Details
You have last looked at the following articles: