No results were found for the filter!
steinert® (Deutschland)
Steinert® piccolo Super Table Lathe Grey cast iron lathe Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile face turning and the amateur has a fully-fledged,...
€4,680.00 *
steinert® (Deutschland)
Steinert® piccolo SuperProfi Table Lathe Grey cast iron lathe with back bearing Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to the solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile shuddering turning and the amateur has a...
€4,850.00 *
steinert® (Deutschland)
Steinert® piccolo Vario Table Lathe Turning lathe made of grey cast iron with movable headstock Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile face turning, and the amateur has a fully-fledged,...
€4,990.00 *
steinert® (Deutschland)
Steinert Piccolo Vario Drive Unit Universal drive for individual use in industry and trade. The device is equipped with a standard spindle thread M33x3.5 and an inner cone MK2 and can be equipped with a variety of clamping devices for different applications. 3-stage belt transmission Spindle thread M33x3.5 Inner cone MK2 Hollow shaft Ø 11mm Axle height 160mm Aluminium base plate 350 x 440 x 10mm Motor 400v,...
€3,100.00 *
steinert® (Deutschland)
Centre Height 180mm for the Steinert® piccolo lathe The centre height 180mm enables a maximum turning diameter of 360mm. Must be ordered with the machine. Retrofitting is not possible or only possible with great effort.
€125.00 *
steinert® (Deutschland)
Centre Height 180mm with Rotating Headstock only for the Steinert® piccolo Vario lathe The rotating headstock is only compatible with the piccolo Vario, with a centre height of 180mm. Must be ordered with a machine. Retrofitting is not possible.
€169.00 *
steinert® (Deutschland)
Bench Bed Extension 700mm for the Steinert® piccolo lathe The bench bed extension consists of a second grey cast iron bench bed, which is precisely adapted to the machine. This results in a tip width of 1000mm. The extension can be removed if necessary. The extension must be ordered with the machine. Later retrofitting is only possible with great effort. *The long tool support rail in Figure 2 is not part of the bench bed extension.
€385.00 *
steinert® (Deutschland)
Wooden Base Frame for the Steinert® piccolo lathe Solid wood glazed, carpentry work base. Demountable and very stable Length 114 cm x width 57 cm x height: 80 cm
From €349.00 *
steinert® (Deutschland)
Tool Rest 120mm, Shaft 25mm for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€59.00 *
steinert® (Deutschland)
Tool Rest 160mm, Shaft 25mm for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm This tool rest is part of the standard equipment of the steinert® piccolo.
€59.00 *
steinert® (Deutschland)
Tool Rest 240mm, Shaft 25mm for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€59.00 *
steinert® (Deutschland)
Tool Rest 400mm inc. Second Lower Part for the Steinert® piccolo lathe Shank diameter 2 x 25mm For centre height 150mm or 180mm Including second lower part
€265.00 *
steinert® (Deutschland)
Curved Tool Rest for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€85.00 *
Hager (Deutschland)
Copy Device for Spindle Copying for the Steinert® piccolo lathe Optimized for our steinert® piccolo lathe. Technical specifications: Maximum working length 320mm Stable substructure (steel plate 350 x 300 x 10mm) with 2 height-adjustable shafts Ø 30mm Probe for pointed steel and bell knives Operating from left and right side Stencil infeed on both sides Adjustable plexiglass protection For center heights from 180 to 240mm (other center...
€1,164.00 *
Hager (Deutschland)
Stencil blank 75 x 4 x 330 mm for Piccolo copier Template blank for copying device suitable for longitudinal and plan copying unit Hager LP320-F
€8.35 *
Hager (Deutschland)
Drilling and Milling Machine DB 190 for the steinert® piccolo lathe and other makes For insertion into the lower part of the hand rest Travel path 190mm, depth stop on both sides Maintenance-free adjustable special guide Shaft Ø 25mm with milled anti-twist device Height adjustment via adjusting ring Euro mount 43mm Upper slide rotatable for milling work Milling Motor and lower part of the hand rest not included The Metabo Milling Motor FME737 is compatible...
€244.00 *
steinert® (Deutschland)
Steady Rest - Small for the steinert® piccolo lathe and other makes With individually adjustable rollers, swiveling Possible to adapt to other makes of lathe
From €398.00 *
steinert® (Deutschland)
Quill Sliding Pin Retrofit Kit For wood lathe steinert® piccolo from year of construction 2017 In contrast to the standard quill, this sliding quill has a longer quill stroke of 120 mm and lever feed instead of the handwheel. Such a design, also known as a drill quill, is suitable if a lot of drilling is to be carried out. This is useful, for example, in the manufacture of writing implements. Deep holes can be drilled “in one go” without having to reposition the...
€395.00 *
steinert® (Deutschland)
Sanding Table with Plywood Support, 25mm Shaft for the Steinert® piccolo lathe and other makes Dimensions: 200 x 120 mm
€64.50 *
steinert® (Deutschland)
Sanding pad Ø 250 mm, M33 x 3.5 made of aluminium Flat surface for attaching self-adhesive sanding pads for spindle thread M33x3.5
€129.65 *
You have last looked at the following articles: