No results were found for the filter!
steinert® (Deutschland)
Steinert® VGM300 Lathe heavy professional turning lathe made of gray cast iron The new Steinert® VGM300 hand lathe is an essential for our three heavy machines V B36, G amma and M aximo. The wishes and experiences of turners who are looking for particularly solid and long-lasting turning technology made in Germany, have been incorporated into the development of this machine. A massive, torsion-resistant cast bench bed serves as the base frame, which...
€10,985.00 *
steinert® (Deutschland)
Steinert® gamma 250/1010 Lathe heavy hand lathe made of grey cast iron Centre height: 250mm Distance between centres: 1100mm Motor: 2,2 KW, 400v; 50 Hz (other motors with different power and voltage can be installed for a surcharge) Mains connection: 230v, 50 Hz Speeds in rpm: variable in 3 ranges from 70 to 3600 Headstock / spindle: grey cast iron with hollow spindle (bore 12 mm) with spindle thread M33 / DIN 800 and MK 2 inner cone, rotatable...
€9,525.00 *
steinert® (Deutschland)
Outboard Turning Device for wood lathe steinert® gamma and VGM300 For the front of the headstock Only for lathes of the steinert gamma type with rotating headstock and steinert VGM300 Diameters of up to 1,100mm are possible with this external turning device. The massive steel construction that accommodates the palm rest can also be retrofitted on older machines. Floor support included The standard tool rest of the machine including the...
€775.00 *
steinert® (Deutschland)
Surcharge center distance 1750 mm for wood lathe steinert® gamma and VGM300 Our Gamma and VGM300 lathes are equipped as standard with a cast iron bed with a length of 1850 mm for a center distance of 1100 mm. The machines can optionally be ordered with a bench bed in a length of 2500 mm for a center distance of 1750 mm. This is an extra charge to the standard version. Retrofitting a standard bed is only possible with a lot of effort and costs. The...
€1,495.00 *
steinert® (Deutschland)
Tool rest 180 mm Shank Ø 30/40mm Tool rest 180 mm with Shank Ø 30 / 40 mm
€185.00 *
steinert® (Deutschland)
Tool rest 275 mm Shank Ø 30/40mm Tool rest 275 mm with Shank Ø 30 / 40 mm
€205.00 *
steinert® (Deutschland)
Tool rest 425 mm Shank Ø 30/40mm Tool rest 425 mm with Shank Ø 30 / 40 mm
€225.00 *
steinert® (Deutschland)
Tool rest 1000 mm incl. second lower part 2 x shaft Ø 30 or 40mm For long turned parts. Available with 2 x shank Ø 30 or 2 x shank Ø 40 mm. Please select.
€640.00 *
steinert® (Deutschland)
Tool rest curved, Ø 150 mm, adjustable Shank Ø 30 / 40mm Tool rest curved, Ø 150 mm, adjustable with shank Ø 30 / 40 mm
From €129.50 *
steinert® (Deutschland)
24-Step Sub-Setup for lathe steinert® maximo and VGM300 This option for the steinert® maximo lathe must be ordered together with the machine Retrofitting at a later date is only possible with great effort
€495.00 *
TOS (Tschechien)
TOS precision 4-jaw chuck Ø 125mm VB36 Bayonet with base jaws Axminster or Vicmarc VM120 This TOS precision 4-jaw chuck is an extremely stable and precisely processed chuck with a long service life. It is supplied with base jaws for holding Axminster or Vicmarc 120 clamping jaws. It can therefore be used flexibly for a wide variety of applications. As an alternative to the base jaws for Axminster or Vicmarc 120 attachments, the chuck can also be used with...
€637.50 *
steinert® (Deutschland)
Professional Steady Rest with individually adjustable rollers & swivelling body Clamping range Ø from approx. 18 mm to 220 mm The steady rest comes equipped with Blickle high-performance rollers. The standard design of the steady rest is for a bedway spacing of 80 mm. However, it can be adapted to different spacings. Please specify the bedway spacing of your lathe, and we will be happy to provide you with a quote.
From €899.00 *
steinert® (Deutschland)
Face Plate for VB36 & VGM300 Ø 140, 200, 250 or 320mm These face plates are screwed directly onto the bayonet flange of the machine. This eliminates the risk of accidental loosening. Face plates are available with Ø 140mm, 200mm, 250mm and 320mm. Please select size. The faceplate Ø 140mm is already part of the basic equipment for the VB36. The scope of delivery includes 3 collar screws.
From €69.00 *
steinert® (Deutschland)
Thread adapter from bayonet to various threads for VB36 and VGM300 lathes Adapter for VB36 and VGM300 bayonet to chuck thread. Please select the desired thread. 3 collar screws are included in the scope of delivery.
€129.00 *
steinert® (Deutschland)
Special paint for Steinert and Hapfo lathes We implement special color requests for our Steinert and HAPFO lathes. It should be noted that we do not have any accessories (e.g. tool supports) in stock for special colors. Subsequent procurement in a special color is associated with a considerable additional price.
€620.00 *
You have last looked at the following articles: