Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 

Chuck

A reliable and sturdy chuck will allow you to securely and accurately attach your woodturning projects to the lathe spindle. Our chucks are available in a variety of sizes and styles to meet the needs of your woodturning projects. They allow for easy and secure attachment from small pieces of wood to larger and heavier projects.

In this section you will find different versions of self-centering jaw chucks, screw chucks and face plates for screwing on the wood blank, or drivers and traveling center punches for fastening long wood projects. You can also buy bung chucks for driving in the wood blank. In addition, you will find vacuum clamping technology, options for eccentric fastening of workpieces or mandrels for clamping kits for writing instruments and the like. High quality drill chucks can also be found in this category.

Read more...
1 From 18
No results were found for the filter!
NEW
WSV 2024
Essential SK88 Solo lathe chuck without top jaws
Axminster (England)
Axminster Essential SK88 lathe chuck
Solo
Spindle thread: M33 x 3.5 or 1" x 8tpi
€170.00 *
Details
WSV 2024
4-Backenfutter ZENTRA mit Axminster-Grundbacken
Zentra (China)
ZENTRA 4-jaw lathe chuck Ø 100 mm with threaded flange (various threads) and base jaws for Axminster attachments
From €199.00 *
Details
Axminster Schwalbenschwanz Aufsatzbacken
Axminster (England)
Dovetail attachments type A for Axminster, TOS, and Zentra lining
€54.90 * €66.50 *
Details
WSV 2024
Drechselfutter Axminster Evolution SK114
Axminster (England)
Axminster Woodturning Evolution
SK114 Chuck
Spindle thread: M33 x 3.5 or 1 "x 8tpi
From €324.00 *
Details
WSV 2024
Holzfutter Multipkex
Wooden Chuck M33 x 3.5 Multiplex; Ø 90mm, length 40mm
€14.50 *
Details
WSV 2024
Stirnmitnehmer MK2 oder MK3 (Vierzack)
Axminster (England)
Drive Centres Ø 24 mm (4-prong) 1MT, 2MT or 3MT
From €26.90 *
Details
Exzenter-Spannfutter EXMK - steinert
steinert® (Deutschland)
EXMK SOLO Eccentric Chuck Spindle thread: M33 x 3.5
€399.00 *
Details
WSV 2024
Robert Sorby Patriot Drechselfutter Aufsatzbacken
Sorby (England)
Deep Clamping Cylinder 108mm for lathe chucks Sorby Patriot and NOVA
€139.80 *
Details
WSV 2024
Einsteiger-Set Drechselfutter Axminster Clubman SK100
Axminster (England)
Axminster Woodturning Clubman
SK100 Chuck Package
Spindle thread: M33 x 3.5 or 1" x 8tpi
€324.00 *
Details
WSV 2024
Spannzangenfutter-Set ER20 „Junior“
Axminster (England)
Collet Chuck Set ER20 “Junior” M33 x 3.5 or 1" x 8tpi thread
From €84.90 *
Details
evolution travelling center punch tip
Axminster (England)
Live Centre "Evolution" MK2
€111.90 *
Details
WSV 2024
Oneway Spannbacken #2 verlängert
Oneway (Kanada)
Extension Jaws #2 for Stronghold lathe chucks
€54.30 *
Details
WSV 2024
gerillte Spannbacken, tief
Axminster (England)
grooved cylinder jaws for Axminster, TOS and Zentra lining
€129.90 *
Details
WSV 2024
Gelenk-Hakenschlüssel
Articulated Hook Wrench hardened pin Ø 4mm, adjustable for shafts Ø 35 - 60mm
€27.40 *
Details
Robert Sorby Patriot Drechselfutter
Sorby (England)
Lathe Chuck Sorby Patriot Spindle thread M33 x 3.5, 1" x 8tpi or M20x1.5
From €399.00 *
Details
Drechselfutter Evolution SK100
Axminster (England)
Axminster Evolution SK100 lathe chuck
SOLO without top jaws
Spindle thread: M33 x 3.5 with or without Euro ASR
From €274.00 * €299.00 *
Details
WSV 2024
TOS Super-Präzisions-Vierbackenfutter
TOS (Tschechien)
TOS Precision 4-jaw Chuck Ø 125mm M33x3.5 with base jaws Axminster or Vicmarc VM120
€679.00 *
Details
Vierzack-Stirnmitnehmer mit 27mm zyl. Schaft
Axminster (England)
Drive Centre with Cylindrical Shaft Ø 27mm 4-prong Ø 25mm, for Axminster top jaws type C
€24.60 *
Details
WSV 2024
Vierkant-Spannschlüssel für TOS-Präzisions-3 und -4-Backenfutter
TOS (Tschechien)
Chuck Key, 9mm Square for lathe chucks (e.g. TOS chuck Ø 160mm and Zentra Ø 100mm)
€22.50 *
Details
WSV 2024
Planscheibe, Stahl mit drei Teilkreisen Ø 150 mm
Axminster (England)
Axminster Face Plate Ø 150mm M33 x 3.5 thread
€55.90 *
Details
WSV 2024
Schraubenfutter (Axminster)
Axminster (England)
Axminster Screw Chuck Ø 75mm Thread M33 x 3.5 or 1" x 8tpi, can also be used as a faceplate
From €44.90 *
Details
WSV 2024
Stirnmitnehmer mit Abdrückmutter
steinert® (Deutschland)
Drive Centre Ø 19 mm 6-Prong, 2MT with extraction nut
€129.00 *
Details
WSV 2024
hapfo Balancer, Planscheibe mit verstellbaren Auswuchtscheiben
hapfo®/steinert® (Deutschland)
hapfo Balancer M33 x 3.5 face plate with balancing washers
€209.00 *
Details
WSV 2024
verlängerter Stirnmitnehmer
Hager (Deutschland)
Extended Drive Centres Ø 24mm 4-Point, 2MT or 3MT with forcing nut - for longitudinal copier & ball turning device
From €101.20 *
Details
1 From 18

Chucks are used in various tools and machines and are called differently according to the field of application. Lathe chucks used in woodworking on lathes are called lathe chucks.

In general, the chuck can be distinguished between lathe chuck and drill chuck. If the chuck holds the workpiece, then it is also called a lathe chuck. Chucks for fastening drills or similar tools are called drill chucks.
The lathe chuck is mainly used on lathes. They can be divided into different categories, such as the three-jaw or four-jaw chuck. The three-jaw chucks are mainly used for round, triangular or hexagonal workpieces. The four-jaw chuck, on the other hand, is used for four- and eight-edged workpieces. four-jaw chucks for the wood lathe usually have base jaws onto which differently shaped top jaws are screwed.
You will have already encountered a drill chuck on other machines such as drills or milling machines. Quick-action chucks, gear rim drill chucks or precise collet chucks are often used.
When buying a lathe chuck, the quality is particularly important so that safe and stable work is possible. It is not only worth comparing products, but also choosing a high-quality brand.

Other types
In addition to the lathe chuck and drill chuck, there are other forms of chuck that are suitable according to their intended use. These include the following:
- Face plates for screwing on larger pieces of wood for bowls or plates
- Screw chucks for screwing on smaller and medium-sized wood blanks
- Drivers and center punches for fastening wooden scantlings or round timber
- Mandrels, also known as clamping mandrels, for holding sleeves or drilled-through workpieces
- Vacuum chucks
- Bung chucks, drive-in chucks

back to top...
You have last looked at the following articles: