Special offer at the start of the month

2 - 13mm collets with 1mm clamping path each Please choose the size you want! Collet type ER-20 for: Collet chuck Axminster "Junior". Collet mandrel Axminster. Evolution tool handle.

Gold With this kit you have the opportunity to create a unique, unusual and practical piece - a keychain with a ballpoint pen. With a length of only 82.5 mm, this clever little ballpoint pen is always at hand when you need a pen. The kit features a high-quality 24-karat gold plating applied using the more durable rack-plating process. Additionally, an epoxy coating provides...

Grain K600, K1200 or K3000 Perhaps the most popular range of belts this robust material is designed to handle the demands of all steels. Not strictly ‘grit sizes’ these belts are built using brick and pyramid abrasive shaping. The highest 3000 ‘grit’ size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.

in various grit sizes for hard and demanding surfaces by means of ceramic grain technology such as hard woods and mineral materials intermediate sanding of filler and top coats the special open net structure enables almost dust-free sanding with a very long service life

Grain 24, 40 or 80 Extremely resistant to heat and grain breakage Fully synthetic resin bond Very high stock removal rate Aggressive abrasive grain Abrasive grain: aluminum oxide

10 piece The JSP Springfit FFP2 disposable foldable respirator with Typhoon valve and a unique endoskeleton structure offers a wealth of features such as optimal fit, comfort, compatibility and safety according to EN 149, protecting against fibers and fine dusts of all kinds according to the medium protection class (94% filtration efficiency). The Typhoon valve reduces breathing...

2 pieces including screws Information, pictures and videos on the manufacturer's website: www.arbortechtools.com Arbortech product catalog (PDF) ...

2MT on B12, B16, B18 - 3MT on B16, B18 Insertion pins (also called taper pins) are used to hold drill chucks. Sizes of the drill chuck taper: largest diameter in mm smallest diameter in mm B12 12,06 11,14 B16 15,73 14,53 B18 17,78 16,18 Sizes of the MT morse taper: largest diameter in mm smallest diameter in mm 2MT 17.98 14.53 3MT 24.05 19.76

Cutting geometry: Concave Back side: Flat Mounting hole: 2.40 mm Flank length: 9 mm

Schneidengeometrie: Konkav Rückseite: Flach Aufnahmebohrung: 4,30 mm Flankenlänge: 16 mm

Cutting geometry: Concave Back side: Flat Mounting hole: 3.30 mm Diameter: 8 mm

Matt chrome-plated tip These kits are suitable for making free-form writing instruments. Only the tip is given as a design element in 3 different versions. The shape of the pen can be made individually without having to pay attention to the centre piece or end cap. The refill remains fixed and cannot be sunk. The kit consists of: - Brass barrel 85 mm x 7.0 mm Ø (internal thread 1/4" x 40 tpi) -...

Gold-plated brass tip These kits are suitable for making free-form writing instruments. Only the tip is given as a design element in 3 different versions. The shape of the pen can be made individually without having to pay attention to the centre piece or end cap. The refill remains fixed and cannot be sunk. The kit consists of: - Brass barrel 85 mm x 7.0 mm Ø (internal thread 1/4" x 40 tpi) -...

Black anodised aluminium tip These kits are suitable for making free-form writing instruments. Only the tip is given as a design element in 3 different versions. The shape of the pen can be made individually without having to pay attention to the centre piece or end cap. The refill remains fixed and cannot be sunk. The kit consists of: - Brass barrel 85 mm x 7.0 mm Ø (internal thread 1/4" x 40 tpi) -...

Inner dimensions: 15 x 15 x 145mm, with sliding lid 15 x 15mm inside, length 144mm inside 21 x 24mm outside, length 150mm outside

20 x 20 x 140 mm Wooden blanks for writing instruments and other kits Dimensions: approx. 20 x 20 x 140 mm Examples are shown in the product photo. The delivered blanks may differ slightly in the wood image.

22 x 22 x 140 mm Wooden blanks for writing instruments and other kits Dimensions: approx. 22 x 22 x 140 mm Examples are shown in the product photo. The delivered blanks may differ slightly in the wood image.

Grey Pen blanks made of BT acrylic for the production of turned pens Size 150 x 18 x 18mm The surface should be sanded with a very fine abrasive (preferably wet) . The surface can also be polished with polish

Mounting Ø 16mm with 2 inserts, mounting Ø 10mm and for flat shanks Mounting diameter of the booklet: 16mm 2 x mounting inserts for tool shanks with Ø 10mm and flat tool shanks are included in the scope of delivery An insert for shafts with Ø 13mm is optionally available.

Mounting Ø 16mm with 2 inserts, Mounting Ø 13mm and Ø 10mm Mounting diameter of the booklet: 16mm 2 x mounting inserts for tool shafts with Ø 10 and 13mm are included in the scope of delivery A mounting insert for flat tool shanks is optionally available

Mounting Ø 16mm with 2 inserts, Mounting Ø 13mm and Ø 10mm Mounting diameter of the booklet: 16mm 2 x mounting inserts for tool shafts with Ø 10 and 13mm are included in the scope of delivery A mounting insert for flat tool shanks is optionally available

19x19x140 mm Copy turning steel (pointed steel) HSS (High Speed Steel, standard no. 1.3343) Particularly suitable for soft woods and homogeneous indigenous hard woods, very good edge sharpness, very clean cut. An insert wedge should be used when used in machines with screw fastening .

115 x 140 x 5mm, Grain 280 The direct coating on one side ensures perfect sanding without sanding through. The extremely high flexibility and the particularly fine sanding feel with the Softpad M guarantee the finest sanding results in the most difficult areas. The sanding mat is ideal for wet and dry sanding and is free from solvents.

123x98x12 mm, grit 100 to 220 2-sided, directly coated sanding mats (silicon carbide) on soft, pressure-distributing foam (KA.EF series 100). They are ideal for processing curves, edges, depressions, radii and surfaces - in dry and wet sanding - for simple sanding. For fine wood sanding, varnish, paint, filler, spatula, plastic, composites, rubber By using the foam as a carrier material, the grinding...