Pneumatic chisels for wood

A system for the highest demands

Processing large workpieces in woodworking requires special tools. This is where the high-quality, handmade, robust and virtually maintenance-free compressed air carving chisel from Gamma Zinken (Italy) is an ideal tool for ambitious amateurs and professionals alike.
Thanks to the large number of hand-forged chisels from the Stubai brand in our range, you can customize the tool to your individual requirements. Only a small compressor with a minimum of 0.35 kW is required to operate it. The pneumatic carving chisel weighs 0.75 kg without accessories and is easy to handle. The stroke frequency ranges from 1000 to 8000 strokes per minute and can be infinitely adjusted. It works at pressures between 0.5 and 4.0 bar, a 3 in compressed air hose, which can withstand pressures of up to 10 bar, is included in the scope of delivery.

Read more...
No results were found for the filter!
GammaZinken Druckluft-Schnitzmeißel
Gamma Zinken (Italien)
Pneumatic Carving Chisel Gamma tines DAN96
€489.00 *
Details
Werkzeug-Set für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Tool Set A consisting of 5 tools
€450.00 *
Details
Werkzeug-Set für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Tool Set B Consisting of 5 tools
€445.00 *
Details
Werkzeug-Set für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Tool Set C consisting of 5 tools
€425.00 *
Details
Werkzeug für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Flat Chisel Straight Widths: 8 to 30mm
From €68.85 *
Details
Werkzeug für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Cranked Flat Chisel Widths: 12 to 20mm
From €82.35 *
Details
Werkzeug für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Gouge Round Flat, Straight Widths: 8 to 30mm
From €78.35 *
Details
Werkzeug für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Gouge Round Flat, Cranked Widths: 10 to 16mm
From €83.35 *
Details
Werkzeug für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Gouge Round Deep, Straight Widths: 8 to 30mm
From €83.35 *
Details
Werkzeug für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Gouge Round Deep, Cranked Widths: 12 to 20mm
From €96.85 *
Details
Werkzeug für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Goat Foot 60° Straight Width: 10mm
€91.85 *
Details
Werkzeug für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Goat foot 75° Straight Widths: 8 to 30mm
From €91.85 *
Details
Werkzeug für GammaZinken Druckluft-Schnitzmeißel
Stubai (Österreich)
Goat Foot Ranked 75° Widths: 16 to 20mm
From €119.85 *
Details
Ölschmierer für GammaZinken Druckluft-Schnitzmeißel
steinert® (Deutschland)
Compressed Air Lubricator with reducing valve and pressure gauge
€209.00 *
Details
Oil for Compressed Air Oilers
Gamma Zinken (Italien)
Oil for Compressed Air Oilers Contents: 1.0 Ltr.
€12.10 *
Details

Tool sets and special chisels

In order to use the pneumatic chisel for wood as effectively and versatilely as possible, the Drechselzentrum Erzgebirge offers you a large selection of hand-forged special chisels from the traditional Austrian brand Stubai, which can be used to professionally process not only wood, but even natural stone such as marble.
Flat chisels, hollow chisels and chisel feet, put together as sets or as individual pieces, tailored to your needs. With the help of a quick-release fastener, these chisels can be easily attached to the pneumatic carving chisel and replaced at any time as required.

Oil atomizer and special oil for maintenance and service life

The pneumatic carving chisel is virtually maintenance-free, but regular lubrication ensures its smooth operation in the long term and increases its service life. For this purpose, we offer you a compressed air oiler with reducing valve and pressure gauge which, installed at the air outlet of the compressor, acts as an oil atomizer as well as the optimum special oil for frictionless and effortless maintenance
.

back to top...
You have last looked at the following articles: