Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 

Wood lathe chuck

The chuck is used in various tools and machines and is called differently according to its field of application.
When the chuck holds the workpiece, it is also called a lathe chuck. However, the chuck on tools such as a lathe can also accommodate certain insert tools and is then called a drill chuck. The quality of the chuck is particularly important to ensure safe and stable operation. Therefore, it is not only worth comparing products, but also choosing a high-quality brand. If you want to save the long way to the nearest woodturning store, you can easily and quickly order chucks through our online store and at the same time benefit from many years of experience in woodturning and crafts and high-quality products.

Features and characteristics 

In general, chucks can be distinguished between drill chucks and lathe chucks depending on the type of use. You will have already encountered drill chucks frequently in tools, as this is often used for hammer drills or milling machines. Here, the quick-action and gear rim drill chucks are frequently used.

The lathe chuck, on the other hand, is mainly used when using lathes. They can also be divided into different categories, such as the three-jaw or four-jaw chuck. The three-jaw chucks are mainly used for round, triangular or hexagonal workpieces. The four-jaw chuck, on the other hand, is used for four- and eight-edged workpieces. The advantage of these chucks is that the tool is easily centered. You can purchase the power chuck with or without a passage, whereby the passage is also available in various diameters.

Read more...
1 From 17
No results were found for the filter!
4-Backenfutter ZENTRA mit Axminster-Grundbacken
Zentra (China)
ZENTRA 4-Backen-Drechselfutter Ø 100 mm with threaded flange (various threads) and base jaws for Axminster attachments
From €199.00 *
Details
Axminster Schwalbenschwanz Aufsatzbacken
Axminster (England)
Axminster Woodturning Dovetail Jaws Type A for Axminster, TOS, and Zentra chucks
€60.90 *
Details
Drechselfutter Axminster Evolution SK114
Axminster (England)
AXMINSTER Woodturning EVOLUTION SK114 Chuck - Solo Spindle thread: M33 x 3.5 or 1 "x 8tpi
From €324.00 *
Details
Holzfutter Multipkex
Wooden Chuck M33 x 3.5 Multiplex; Ø 90mm, length 40mm
€14.50 *
Details
Stirnmitnehmer MK2 oder MK3 (Vierzack)
Axminster (England)
Face driver Ø 24 mm (4-prong) 4-Prong, 1MT, 2MT or 3MT
From €24.20 *
Details
Exzenter-Spannfutter EXMK - steinert
steinert® (Deutschland)
EXMK SOLO Eccentric Chuck Spindle thread: M33 x 3.5
€399.00 *
Details
Robert Sorby Patriot Drechselfutter Aufsatzbacken
Sorby (England)
Deep Clamping Cylinder 108mm for lathe chucks Sorby Patriot and NOVA
€124.40 *
Details
Einsteiger-Set Drechselfutter Axminster Clubman SK100
Axminster (England)
Drechselfutter Clubman SK100 (Ø 100 mm) Einsteiger-Set Spindle thread: M33 x 3.5 or 1" x 8tpi
€324.00 *
Details
Spannzangenfutter-Set ER20 „Junior“
Axminster (England)
Collet Chuck Set ER20 “Junior” M33 x 3.5 or 1" x 8tpi thread
From €84.90 *
Details
evolution travelling center punch tip
Axminster (England)
Evolution Moving Centre Punch Morse taper 2MT
€111.90 *
Details
Oneway Spannbacken #2 verlängert
Oneway (Kanada)
Extension Jaws #2 for Stronghold lathe chucks
€54.30 *
Details
gerillte Spannbacken, tief
Axminster (England)
Axminster Woodturning Hollow Form Jaws for Axminster, TOS, and Zentra chucks
€123.75 *
Details
Gelenk-Hakenschlüssel
Articulated Hook Wrench hardened pin Ø 4mm, adjustable for shafts Ø 35 - 60mm
€27.40 *
Details
Robert Sorby Patriot Drechselfutter
Sorby (England)
Lathe Chuck Sorby Patriot Spindle thread M33 x 3.5, 1" x 8tpi or M20x1.5
From €324.40 *
Details
Drechselfutter Evolution SK100
Axminster (England)
AXMINSTER Woodturning EVOLUTION SK100 Chuck - Solo Thread M33 x 3.5 - with or without Euro ASR
From €279.00 * €312.00 *
Details
TOS Super-Präzisions-Vierbackenfutter
TOS (Tschechien)
TOS Precision 4-jaw Chuck Ø 125mm M33x3.5 with base jaws Axminster or Vicmarc VM120
€637.50 *
Details
Vierzack-Stirnmitnehmer mit 27mm zyl. Schaft
Axminster (England)
Drive Centre with Cylindrical Shaft Ø 27mm 4-prong Ø 25mm, for Axminster top jaws type C
€22.95 *
Details
Vierkant-Spannschlüssel für TOS-Präzisions-3 und -4-Backenfutter
TOS (Tschechien)
Chuck Key, 9mm Square for lathe chucks (e.g. TOS chuck Ø 160mm and Zentra Ø 100mm)
€22.50 *
Details
Planscheibe, Stahl mit drei Teilkreisen Ø 150 mm
Axminster (England)
Axminster Face Plate Ø 150mm M33 x 3.5 thread
€48.90 *
Details
Schraubenfutter (Axminster)
Axminster (England)
Axminster Screw Chuck Ø 75mm Thread M33 x 3.5 or 1" x 8tpi, can also be used as a faceplate
From €44.90 *
Details
Stirnmitnehmer mit Abdrückmutter
steinert® (Deutschland)
Drive Centre Ø 19 mm 6-Prong, 2MT with extraction nut
€129.00 *
Details
hapfo Balancer, Planscheibe mit verstellbaren Auswuchtscheiben
steinert® (Deutschland)
hapfo Balancer M33 x 3.5 face plate with balancing washers
€209.00 *
Details
verlängerter Stirnmitnehmer
Hager (Deutschland)
Extended Driver Ø 24mm 4-Point, 2MT or 3MT with forcing nut - for longitudinal copier & ball turning device
From €101.20 *
Details
Marlin Mitnehmer-System, Werkzeugträger
Multistar (Deutschland)
Marlin Tool Carrier 1MT, 2MT or 3MT
From €24.90 *
Details
1 From 17

Other types

In addition to the lathe chuck and drill chuck, there are other forms of chucks that are suitable according to the choice of tool and its intended use. These include the following:
- Power chuck: This type is hydraulically attached to the workpiece and are mainly used in "Computerized Numeical Control" machines.
- Shrink fit chucks: These chucks enable a precise clamping process on various milling machines in terms of concentricity.
- Clamping head and collet chucks: This chuck operates according to the pull mechanism, whereby the clamping head is engaged with the aid of the changeover device.

back to top...
You have last looked at the following articles: