Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 

Tighten

1 From 8
No results were found for the filter!
4-Backenfutter ZENTRA mit Axminster-Grundbacken
ZENTRA 4-Jaw Lathe Chuck Ø 100mm Including base jaws for Axminster attachments, various threads
From €190.00 *
Axminster Schwalbenschwanz Aufsatzbacken
Axminster Woodturning Dovetail Jaws Type A for Axminster, TOS, and Zentra chucks
€55.40 *
Drechselfutter Axminster Evolution SK114
Wood Turning Chuck Evolution SK114 SOLO without Top Jaws Spindle thread: M33 x 3.5 or 1" x 8tpi
From €279.40 *
Holzfutter Multipkex
Wooden Chuck M33 x 3.5 Multiplex; Ø 90mm, length 40mm
€14.49 *
Stirnmitnehmer MK2 oder MK3 (Vierzack)
Drive Centre - Ø 24mm 4-Prong, 1MT, 2MT or 3MT
From €19.65 *
Exzenter-Spannfutter EXMK - steinert
EXMK SOLO Eccentric Chuck Spindle thread: M33 x 3.5
€399.00 *
Robert Sorby Patriot Drechselfutter Aufsatzbacken
Deep Clamping Cylinder 108mm for lathe chucks Sorby Patriot and NOVA
€97.30 *
Einsteiger-Set Drechselfutter Axminster Clubman SK100
Wood Turning Chuck Clubman SK100 (Ø 100mm) Starter Set Spindle thread: M33 x 3.5 or 1" x 8tpi
€279.40 *
Spannzangenfutter-Set ER20 „Junior“
Collet Chuck Set ER20 “Junior” M33 x 3.5 or 1" x 8tpi thread
€82.50 *
mitlaufende Körnerspitze Axminster Evolution
Moving Centre Point Evolution Morse taper MK1, MK2 or MK3
€99.60 *
Oneway Spannbacken #2 verlängert
Extension Jaws #2 for Stronghold lathe chucks
€54.30 *
gerillte Spannbacken, tief
Axminster Woodturning Hollow Form Jaws for Axminster, TOS, and Zentra chucks
€119.40 *
Gelenk-Hakenschlüssel
Articulated Hook Wrench hardened pin Ø 4mm, adjustable for shafts Ø 35 - 60mm
€23.55 *
Robert Sorby Patriot Drechselfutter
Lathe Chuck Sorby Patriot Spindle thread M33 x 3.5, 1" x 8tpi or M20x1.5
From €289.00 *
TOS Super-Präzisions-Vierbackenfutter
TOS Precision 4-jaw Chuck Ø 125mm M33x3.5 with base jaws Axminster or Vicmarc VM120
€509.00 *
Vierzack-Stirnmitnehmer mit 27mm zyl. Schaft
Drive Centre with Cylindrical Shaft Ø 27mm 4-prong Ø 25mm, for Axminster top jaws type C
€23.20 *
Vierkant-Spannschlüssel für TOS-Präzisions-3 und -4-Backenfutter
Chuck Key, 9mm Square for lathe chucks (e.g. TOS chuck Ø 160mm and Zentra Ø 100mm)
€16.80 *
Planscheibe, Stahl mit drei Teilkreisen Ø 150 mm
Face Plate Ø 150mm M33 x 3.5 thread
€49.80 *
Schraubenfutter (Axminster)
Axminster Screw Chuck Ø 75mm Thread M33 x 3.5 or 1" x 8tpi, can also be used as a faceplate
From €45.95 *
Stirnmitnehmer mit Abdrückmutter
Drive Centre Ø 19 mm 6-Prong, 2MT with extraction nut
€129.00 *
hapfo Balancer, Planscheibe mit verstellbaren Auswuchtscheiben
hapfo Balancer M33 x 3.5 face plate with balancing washers
€209.00 *
verlängerter Stirnmitnehmer
Extended Driver Ø 24mm 4-Point, MK2 or MK3 with forcing nut - for longitudinal copier & ball turning device
From €101.20 *
Marlin Mitnehmer-System, Werkzeugträger
Marlin Tool Carrier MK1, MK2 or MK3
From €24.90 *
Einsteckzapfen Morsekegel (MK) auf Bohrfutterkegel (B)
Insertion Pin MK1 MK1 on B16
€7.60 *
Stirnmitnehmer MK2 oder MK3 (Sechszack), 39 mm
Profi Drive Centre Ø 39mm 6-Prong, 2MT or 3MT
From €131.80 *
Drechselfutter Clubman SK100 (Ø 100 mm) mit Aufsatzbacken Typ C
Wood turning Chuck Clubman SK100 (Ø 100mm) with Top Jaws Type C Spindle thread: M33 x 3.5, 1" x 8tpi or ¾" x 16tpi
€249.00 *
formschlüssige Ablaufsicherung
Form-Fitting Loosening Protection 2 half-shells
€55.00 *
Exzenterspanner
Eccentric Clamp Ø 25mm, Mount M33x3.5 Length 40 or 102mm; for clamping in bores
From €69.00 *
Spannschlüssel für Drechselfutter Clubman K8/SK80 und K10/SK100
Chuck Key Standard for Clubman K8 / SK80 and K10 / SK100
€27.20 *
Axminster O'Donnell Aufsatzbacken 50mm
Axminster Woodturning O'Donnell Dovetail Jaws - 50mm for Axminster, TOS, and Zentra chucks
€98.80 *
Schrauben-Einsatz für Axminster Spannbacken Typ A
Screw Inserts for Axminster top jaws type A, C or C80
From €26.90 *
Planscheiben-Ring Typ A
Axminster Faceplate Ring for Axminster top jaws type A, B, C, C80 or F
From €25.60 *
Penblank Bohrbacken
Axminster Woodturning Pen Jaws for Axminster, TOS, and Zentra chucks
€86.20 *
Mini-4-Backenfutter Ø 63 mm
Mini 4-Jaw Chuck Ø 63mm with 4 sets of interchangeable jaws and screw insert, for spindle thread 1" x 8tpi & 3/4" x 16tpi
€159.00 *
mitlaufende Körnerspitze 60° Standard
Standard Revolving Centre Punch 60° Morse taper MK1 or MK2
From €30.80 *
mitlaufende Körnerspitze bis 100 kg Belastung, Conzella
Moving Centre Point (up to approx. 100kg load) Morse taper MK2
€136.00 *
Schwalbenschwanz-Aufsätze Typ M (MegaJaws)
Axminster Woodturning Dovetail Jaws Type M (MegaJaws) for Axminster, TOS, and Zentra chucks
€81.60 *
Spundfutter aus Stahl, Ø 35 mm
Bung Chuck Made of Steel, Ø 35mm Spindle thread: M33 x 3.5
€54.00 *
Anschlagfutter (Heurekafutter) mit 3 geschmiedeten Ringen
Heureka Chuck with 3 Forged Rings different spindle threads or blank
From €154.50 *
Vakuum-Hohlfutter Oneway
Oneway Drum Chuck Ø 90 to 300mm
From €48.50 *
Drechselfutter Oneway Talon
Lathe Chuck Talon (M33 x 3.5) with top jaws #2 grooved and screw chuck insert
€233.00 *
Drechselfutter Oneway Stronghold
Stronghold Lathe Chuck (M33 x 3.5 or 1 1/2" x 6tpi Geiger) with top jaws #2 grooved and screw chuck insert
€294.00 *
Vakuum-Dreheinführung
Rotary Vacuum Inlet for VB36 (2014) 3/4" left-hand thread
€230.00 *
Drechselfutter Clubman SK100 (Ø 100 mm) SOLO ohne Aufsatzbacken
Wood Turning Chuck Clubman SK100 (Ø 100mm) SOLO without Top Jaws Spindle thread: M33 x 3.5, 1" x 8tpi or ¾" x 16tpi
€215.90 *
Wood Turning Chuck Clubman SK80 (Ø 80mm) SOLO without Top Jaws
Wood Turning Chuck Clubman SK80 (Ø 80mm) SOLO without Top Jaws Spindle thread: 1" x 8tpi or 3 / 4” x16tpi
€204.40 *
Drechselfutter Axminster Clubman SK80
Wood Turning Chuck Clubman SK80 (Ø 80mm) with Top Jaws Type C80 Spindle thread: 1" x 8tpi or 3 / 4” x 16tpi
€219.00 *
1 From 8
Viewed