Drechselbank Oval

 

No results were found for the filter!
Oval-Drechselbank steinert picOval
steinert® (Deutschland)
steinert® picOval Oval Lathe
based on the table lathe steinert piccolo Vario Centre height over bench bed: 150mm Centre height over external turning device with optional underframe with pull-out external bed: 350mm Distance between centres in the starting position: 200mm Motor: 400v / 0.75kW Gearbox: 6-stage V-belt gear ( electronic speed control with 230 volt mains connection optional ) The oval gear halves the spindle speed! Maximum axis difference...
€4,799.00 *
Details
Oval-Drechsel-Aufsatz picOval
steinert® (Deutschland)
steinert® picOval Oval Lathe Attachment
to be attached to an existing lathe The connection from the lathe spindle to the oval work is made with a universal joint coupling. The oval movement is suitable for oval shapes with a maximum axis difference of 80mm. It is permissible for a maximum mass of workpiece plus chuck of 5.0kg. The maximum distance from the rotating base plate of the oval mechanism to the tool contact point is 180mm for workpieces...
€3,700.00 *
Details
Adapter Unit for steinert® picOval Attachment
steinert® (Deutschland)
Adapter Unit for steinert® picOval Attachment
For adjusting the centre height of the basic lathe Adapter unit for steinert® picOval attachment for adjusting the center height of the basic lathe
€285.00 *
Details
Two-Jaw Chuck Ø 240mm
steinert® (Deutschland)
Two-Jaw Chuck Ø 240mm
for steinert® picOval oval lathe Two-jaw chuck Ø 240mm for steinert® picOval oval lathe
€512.00 *
Details
Face Plate Ø 150mm
steinert® (Deutschland)
Face Plate Ø 150mm
for steinert® picOval oval lathe Faceplate Ø 150 mm for steinert® picOval oval lathe
€112.00 *
Details
Adapter Disk for M33 x 3.5
steinert® (Deutschland)
Adapter Disk for M33 x 3.5
for steinert® picOval oval lathe Adapter disc to M33 x 3.5 for steinert® picOval oval lathe
€140.00 *
Details
Oval-Drechselbank picOval Körnerspitze mit Kugelgelenk
steinert® (Deutschland)
Revolving Centre Point with Ball Joint
for long wood work on steinert® picOval oval lathe center punch with ball joint for long woodworking on steinert® picOval oval lathe
€180.00 *
Details
steinert picOval Mitnehmer mit Kreuzgelenk
steinert® (Deutschland)
Driver with Universal Joint
for long wood work on steinert® picOval oval lathe Driver with universal joint for long woodworking on steinert® picOval oval lathe
€260.00 *
Details
You have last looked at the following articles: