Woodturning machines

Distance between centres 1000 mm, Max diameter over bed 800 mm Designed for the professional user, the PERFORMER 400-FU presents all technical advantages which are characteristic for an efficient wood turning lathe. With a centre height of 402mm, and the swiveling headstock there are all possibilities to realise extraordinary artwork. Characteristics: • Headstock can be swiveled and moved all over the bed • headstock made of cast iron •...

Distance between centres 2000 mm, Max diameter over bed 800 mm Designed for the professional user, the PERFORMER 400-FU presents all technical advantages which are characteristic for an efficient wood turning lathe. With a centre height of 402mm, and the swiveling headstock there are all possibilities to realise extraordinary artwork. Characteristics: • Headstock can be swiveled and moved all over the bed • headstock made of cast iron •...

The V-tool sharpening machine type AFM 95 has a V-turning tool holder which ensures that the V-tool is clamped quickly and with precise repeatability. A regular and precise cutting edge profile is created with a geometry precisely matched to the V-steel. This gives the tools a long service life. The exact clamping position makes setting corrections superfluous after...

CNC all-automatic wood turning lathe for turned parts up to 300 mm For industrial scale manufacture and to satisfy highest demands on precision and in case of extremely complexe parts, our hapfo CHALLENGE-5000 presents all technical advantages, which are characteristic for an efficient all-automatic CNC wood turning lathe. The hapfo CHALLENGE-5000 is capable of turning, milling, grooving, drilling and sanding. Distance between centres: 1600...

for Steinert and Hapfo lathes We implement special color requests for our Steinert and HAPFO lathes. It should be noted that we do not have any accessories (e.g. tool supports) in stock for special colors. Subsequent procurement in a special color is associated with a considerable additional price.

For lathes Killinger KM 1450 SE and KM 1500 SE Steady rest for mounting on the Killinger KM 1450 SE and KM 1500 SE lathe. for center height 200 mm heavy steel construction, wall thickness 20 mm low vibration, no aluminum Clamping diameter min.7.5 mm / max. 110 mm rollers D = 40 mm

for lathe Killinger KM3100SE and KM3000 Swing adapter for the Killinger lathe KM3100 and KM3000. The swivel device consists of an adapter plate and a 450 mm cast iron bench bed extension. The tailstock is moved onto the bed extension and can then be swiveled. This saves laborious lifting and dismantling of the heavy tailstock. Use the resulting free space to process your workpiece, to change tools or to assemble...

with locking pin holder The standard handwheel can be exchanged with a handwheel. With integrated index plate with 24 pitches. To find the different positions the face plate is marked with pitches of 3/4/6/8/24.

Shank Ø: 16, 20, 25, 25.4 or 30 mm Shank for Robert Sorby tool rest system Shank for the Robert Sorby tool rest system. We offer the tenon in different versions. Length and diameter are adapted so that the most common lathes can be equipped with it. Compatible with all tool rests of this series. Standardized M12 x 1.25 mm thread. The length specifications refer exclusively to the height of the tang without...

different sizes and shapes Please select the desired variant! There is a choice of different hand rests for the tool rest system from Robert Sorby. The traditional company from the heart of England convinces with this product with quality materials in combination with high quality workmanship. The rests are made of specially hardened steel and thus ensure a well-sliding, resistance-free surface. Due...

CNC wood turning machine for turned parts up to Ø 400 mm For the production of large series with the highest demands on accuracy, as well as for highly complex parts, the hapfo CHALLENGE-7000 offers all the technical advantages that characterize a powerful CNC fully automatic wood turning machine. The CHALLENGE-5000 can turn, mill, flute, drill and sand. Ideally suited for large series and parts ready for painting. Center width:...

5000-CNC and 7000-CNC The solution for individual requirements. These hapfo CNC wood lathes are modern further developments of the tried and tested hydraulic hapfo copying machines. The machines are available in two basic versions: hapfo 5000-CNC: Centre width: 1,600 mm Copying length: 1,480 mm Centre height: 250 mm Drive: 2.2 kW motor hapfo 7000-CNC: Center width: 1,800 mm, 2,900 mm or 3,700 mm...

Please select the desired length! Tool rest upper part suitable for woodturning lathe hapfo Performer with 402 cm center height in combination hapfo tool rest lower part good gliding of the tool due to high quality grey cast iron convex for optimal adaptation to the tool angle hollow shaped for better accessibility 30 mm shank diameter, approx. 150 mm shank length

M33 x 3.5 face plate with balancing washers Faceplate with adjustable balancing discs without thread. Threaded inserts from Oneway's Stronghold lathe chuck can be used. This thread insert is NOT included and must be ordered separately. The hapfo-BALANCER is a faceplate with integrated, adjustable balancing discs, which enables significantly higher speeds, especially when processing unbalanced wet wood blanks or...

motor 2HP original design VB36 Shaft diameter: 24 mm Keyway width: 8 mm Hole spacing foot flange: 140 x 125 mm

2MT (original Killinger®-spare part) Killinger 4-prong drive centre with 2MT, Ø 25mm (included with KM1400SE, KM1450SE and KM1500SE lathes) also suitable for other lathe makes with 2MT attachment Size of the MT morse taper: largest diameter in mm smallest diameter in mm 2MT 17.98 14.53

For center height 180 - 220 mm Bottom part tool rest made of cast iron, for woodturning machines with center height 180 mm to 220 mm. The lower part is suitable for all tool rests with shank diameter 30 mm. Please measure the distance between the cheeks on your lathe beforehand and select the appropriate variant. The lower part is fully assembled and ready for use. You only have to attach the clamping...

Shank Ø 30mm Peg for extending the tool rest by 120 mm on the lathe. The extension spigot fits all bases with 30 mm receptacle. Suitable for holding tool rests with diameter 30 mm (depth of the hole: 105 mm). Custom made according to customer's request: Upon customer's request, we can adjust the shank Ø and height. This is associated with additional costs. If you need a component to be...

for sphere turning device Killinger KM70 Cup knife (cup steel) diameter 14 mm, HSS (High Speed Steel). Suitable for Killinger KM70 sphere turning device.

Schaft-Ø 30 mm Extension spigot for tool rest by 230 mm on the lathe. The spigot fits all bases with 30 mm shank mount. For tool rests with shank - diameter 30 mm. Special production according to customer's request: On customer's request we can adjust the shank Ø and height. This is connected with additional costs. If you need a component to be adapted to your existing tool base, please...

for hapfo KPF-400

Sale This item is excluded from exchange and return.

for Hapfo KPF-400