Woodturning machines

with base jaws Axminster or Vicmarc VM120 This TOS precision 4-jaw chuck is an extremely stable and precisely processed chuck with a long service life. It is supplied with base jaws for holding Axminster or Vicmarc 120 clamping jaws. It can therefore be used flexibly for a wide variety of applications. As an alternative to the base jaws for Axminster or Vicmarc 120 attachments, the chuck can also be used with...

with threaded flange (various threads) and base jaws for Axminster attachments With threaded flange and base jaws for Axminster attachments. Please select the desired spindle thread when ordering! The variant spindle mount M33 x 3.5 Euro ASR is equipped with the standardized groove for the use of drain protection shells. The lathe also requires this standardized groove in the spindle. Spindle threads other than those listed in the selection are...

for head lathe VB36 Fine grooved mat for placing under the machine frame of the VB36 Vibration dampening effect The head lathe VB36 must be screwed to the floor. This rubber mat is placed between the machine and the floor Dimensions: 545 x 610mm

for VB36 Bowl Turner Lathe (Rear Bearing) For VB36 rear / handwheel side. 2 x pieces are required for the rear bearing. On request, we can also provide instructions on how to change the bearing seals.

for VB36 Bowl Turner Lathe (Front Bearing) For VB36 front / bayonet side. 2 x pieces are required for the front bearing. On request, we can also provide instructions on how to change the bearing seals.

for VB36 Bowl Turner Lathe For VB36 bearings. 4 x pieces are required. On request, we can also provide instructions on how to change the bearing seals.

for Bowl Lathe VB36 For VB36 thrust bearings. 2 x pieces required. Ø outside: 83.5 mm Ø inside: 51.5 mm

for bowlturner lathe VB36 Seal ring included.

for VB36 and VGM300 Collar screws for fastening clamping devices to the bayonet connection of the VB36 and VGM300 machines. Strength class 10.9 Two lengths are available: 25 or 30 mm. Please select! - 25 mm: for chuck flanges and face plates Ø 140, 200 and 250 mm - 30 mm: for face plates Ø 75 and Ø 320 mm and spindle adapter The price is for 1 piece, 3 screws are required per clamping device.

M33 x 3.5 with balancing washers M33 x 3.5 thread extension with adjustable balancing disks for spindle thread M33 x 3.5 This hapfo-BALANCER thread extension with integrated adjustable balancing disks enables significantly higher speeds, especially when processing unbalanced wet wood blanks or eccentrically clamped workpieces. It is also suitable for smaller machines that would otherwise only allow minimum...

Floor model with feet The Killinger KM1500SE lathe is the big brother of our KM1450SE. The machine has the same technical features, but has been adapted in some areas to the wishes of our customers. With a center width of 1100 mm, significantly larger projects can be turned. The design is modeled after the large KM3100SE machine. The lathe is firmly bolted to a wide steel structure. These heavy...

for Killinger lathe® KM 1400 SE and 1450 SE - 1 pair of cast feet, suitable for the table lathes Killinger KM 1400 SE and 1450 SE - also for retrofitting - easy to mount, the heavy feet transform a table model into a floor model - included in delivery are set screws, mats and steel plates for fine adjustment Technical data: Length - width - height: 140 x 560 x 760 mm achieved bench bed height: 930 mm Mass: approx. 70...

for Killinger woodturning lathe® KM 1400 SE, 1450 SE and 1500 SE Bench bed extension for Killinger woodturning machines Additional cast iron bench bed for extending the Killinger KM1400SE, KM1450SE and KM1500SE woodturning lathes by 450 mm. Scope of delivery: - Bench bed extension 450 mm - Fixing screws

for Killinger® KM 1400 SE, 1450 SE, 1500 SE, 3000 SE or 3100 SE lathes Choose the outside turning fixture for your Killinger woodturning lathe! KM1400SE wood lathe: The device is attached to the side of the bench bed of the machine. Then turn and lock the headstock of the lathe! Outside turning on the KM1400SE allows you to machine shell diameters up to 620 mm. KM1450SE, KM1500SE and KM3100SE woodturning machine: The fixture is placed and...

for wood lathe steinert® gamma and VGM300 Our Gamma and VGM300 lathes are equipped as standard with a cast iron bed with a length of 1850 mm for a center distance of 1100 mm. The machines can optionally be ordered with a bench bed in a length of 2500 mm for a center distance of 1750 mm. This is an extra charge to the standard version. Retrofitting a standard bed is only possible with a lot of effort and costs. The...

for Piccolo copier Template blank for copying device suitable for longitudinal and plan copying unit Hager LP320-F

with carbide insert and HSS cup steel for balls with Ø up to 650 mm The hand rest or tool rest lower part of the PERFORMER 400-FU can be used. Optionally for other makes, the ball turning attachment KPF-400 can also be ordered with hand rest lower part. Please select! The ball turning attachment KPF-400 has been specially developed for the hapfo PERFORMER 400-FU (center height 402 mm) and adapted to the dimensions and forces of this machine....

for workpiece Ø 10 to 470 mm The HAPFO steady rest is designed for the HAPFO Performer 400-FU lathe, but can also be used for other lathes. The 3 steady rest arms can be rotated and they are slidably attached to the stable round steel body of the steady rest. This allows the arms to be freely positioned in all directions. This means that the steady rest adapts perfectly to any workpiece Ø from 10 to 470...

for workpiece Ø 10 to 80 mm The 3 steady rest arms can be opened and closed simultaneously in a self-centering manner by means of a lever. The steady rest accommodates workpiece Ø from 12 to 80 mm. This self-centering steady rest was originally designed for HAPFO lathes and is now also available for other makes. The basic version for center height 250 mm is usually in stock. For other center heights we...

for workpiece Ø 10 to 470 mm The HAPFO steady rest is designed for the HAPFO Performer 400-FU lathe, but can also be used for other lathes. The 3 steady rest arms can be rotated and they are slidably attached to the stable round steel body of the steady rest. This allows the arms to be freely positioned in all directions. This means that the steady rest adapts perfectly to any workpiece Ø from 10 to 470...

For Oneway Vacuum Chuck Adaptor This vacuum adapter is specially designed for the VB36 built before 2014. The adapter is inserted into the hollow shaft on the handwheel. The vacuum is sealed by two O-rings. To fasten the adapter, 3 x M6 threads must be inserted into the aluminum handwheel. The adapter has an M33x3.5 thread on which a one-way vacuum rotary inlet can be mounted.

shaft 30 mm, center height 180-200 mm For center height 180-200 mm (depends on heigt and geometry of tool rest basis) shaft diameter 30 mm Suitable for Killinger KM 1400 SE, 1450 SE and 1500 SE lathes

shaft 30 mm, center height 180-200 mm for center height 180-200 mm (depends on heigt and geometry of tool rest basis) shaft diameter 30 mm suitable for Killinger KM 1400 SE, 1450 SE and 1500 SE lathes

shaft 30 mm, center height 280-300 mm for center height 280-300 mm (depends on heigt and geometry of tool rest basis) shaft diameter 30 mm suitable for Killinger KM 3100 SE