Woodturning machines

without shaft Very stable tool rest made of vibration-damping grey cast iron. The tool rest is provided with an M16 hole into which the shaft for the tool rest is screwed (available seperately) The height of the tool rest rail is 110mm. Before ordering, please check whether this size fits your machine. Note that the upper edge of the rail should be at least 10mm below the axis of...

Shank Ø: 30 or 40mm For use on the VBT tool rest rails without a shaft. If the palm rest is used on one machine, the shaft can be glued in. If the tool rest is to be used on multiple machines with different tool rest shank diameters, the shank is not glued and can be changed. Thread: M16 Thread length: 23mm

from Ø 40 mm to Ø 30 mm With the reducing sleeve, hand rests and tool rests with a 30 mm shank diameter can be used in hand rest bases with a Ø 40 mm mount. The sleeve has a collar at the top to prevent it from sinking into the 40 mm hole. Inner Ø: 30 mm Outer Ø: 40 mm Length under collar: 80 mm Length with collar: 91 mm

for centre height 200-250mm 30mm shaft Without support rail

for centre height 250-300mm Large version Shaft 40mm Support Rail not included

steinert® lathes Adaptation to third-party products is possible. To enable this we need detailed information and drawings of the bench bed cross-section and centre height. Consultation is necessary when ordering. Under certain circumstances, there may be an additional price for adjustments.

as button or latching These high-quality foot switches from the German manufacturer Bernstein AG have proven themselves for many years as an additional switching element on the VB36 head lathe. In addition to the practical benefit that both hands remain free when the machine is switched off and on, a foot switch makes a significant contribution to safety when using the lathe. The accident...

for the Steinert® piccolo lathe Optimized for our steinert® piccolo lathe. Technical specifications: Maximum working length 320mm Stable substructure (steel plate 350 x 300 x 10mm) with 2 height-adjustable shafts Ø 30mm Probe for pointed steel and bell knives Operating from left and right side Stencil infeed on both sides Adjustable plexiglass protection For center heights from 180 to 240mm (other center...

Fully automatic machine for turned parts up to Ø 44mm Our Minimat45 is designed for the highly productive manufacture of turned wood parts up to diameter 45mm. The machine is equipped with two pneumatically controlled turning supports, a CNC controlled drilling support and a pneumatically parting support. Both turning supports can be equipped with form cutting tools. They are designed to be liftable so that deep profiles can be...

Steel rail to extend the extra-long tool support to 1000mm

for free-standing tool support stands 2 x support feet for additional stabilisation of the free-standing tool rest stand

for VB36 built before 1996 The original version of the fine adjustment for the VB36 tool supports, was a bit stiff and unwieldy. With this retrofit sleeve, the machine can be equipped with today's Bennison adapter. Delivery including fastening screw and lock washer.

for head lathe VB36 We recommend always replacing the rack and pinion shaft in pairs. In the past, different tooth spacings were installed, individual replacement could lead to problems.

for head lathe VB36 To assemble the handwheel, the shaft for the split pin must be drilled. We recommend always replacing the rack and pinion shaft in pairs. In the past, different tooth spacings were installed, individual replacement could lead to problems.

for head lathe VB36 Pre-assembled version with handwheel. We recommend always replacing the rack and pinion shaft in pairs. In the past, different tooth spacings were installed, individual replacement could lead to problems.

for head lathe VB36

Shank Ø 30/40mm Tool rest 275 mm with Shank Ø 30 / 40 mm

for wood lathe steinert® maximo This option for the steinert® maximo lathe must be ordered together with the machine Retrofitting at a later date is not possible or only possible with great effort

For adjusting the centre height of the basic lathe Adapter unit for steinert® picOval attachment for adjusting the center height of the basic lathe

for steinert® picOval oval lathe Two-jaw chuck Ø 240mm for steinert® picOval oval lathe

for steinert® picOval oval lathe Faceplate Ø 150 mm for steinert® picOval oval lathe

for steinert® picOval oval lathe Adapter disc to M33 x 3.5 for steinert® picOval oval lathe

Foldable version For reliably securing the chuck and workpiece against running off / turning off when running clockwise / counterclockwise and when braking heavily. Foldable variant for easy assembly. Suitable for M33 x 3.5 lathes and chucks with safety groove in EURO standard (ASR). Positive-locking discharge safety devices are significantly more gentle on the material than non-positive...

M33 x 3.5 face plate with balancing washers Face plate with adjustable balancing discs for spindle thread M33 x 3.5 The hapfo-BALANCER is a faceplate with integrated, adjustable balancing discs, which enables significantly higher speeds, especially when processing unbalanced wet wood blanks or eccentrically clamped workpieces. It is also suitable for smaller machines, which otherwise only allow minimal speeds without...