Woodturning machines

for bowl lathe VB36 This extra-long tool rest for very deep vessels is adjustable on a grey cast iron mount. The massive steel rail is very stable and protrudes into the vessel. Outside of the workpiece, the handle of the turning tool can be guided on an additional external hand rest. Please note that the additional hand rest is not included in the scope of delivery and must be ordered...

for Extra Deep Hollowing Rest VB36 This hand rest is an accessory for the extra long tool rest. It can also be used individually as a tool rest protruding into the vessel. Shank (Ø 40mm, length approx. 250mm) with Ø 30mm hole for bracket Extension arm (Ø 30mm, length approx. 350mm) Clamping lever

for Extra Deep Hollowing Rest VB36 Accessories for the extra-long tool rest of the VB36 Serves to guide the tool into deeply turned workpieces

for head lathe VB36 If workpieces with a diameter of more than 915 mm (largest possible diameter above cantilever rail) are to be machined on the VB36, this free-standing tool rest stand must be used. It is suitable for all tool supports of the VB36. The diameter of the mount is 40mm The head lathe VB36 was manufactured in 2 different heights in the past - "L" (low) and "H" (high). Since 2019,...

for Extra Deep Hollowing Rest VB36 Accessories for the extra-long tool rest of the VB36 Serves to guide the tool into deeply turned workpieces

for free-standing tool support stands 2 x support feet for additional stabilisation of the free-standing tool rest stand

for positioning behind the turner This T-shaped support is inserted into the free-standing tool support stand. It serves as an additional tool support behind the turner for particularly long boring tools. This allows the horizontal bearing of the tool to be checked.

for VB36 Bennison adapter The sleeve makes it possible to change the diameter of the drive bearing bore from 40 mm to 24.4 mm so that a pin with a smaller diameter can be used for mounting .

for head lathe VB36 Set of two drive belts

Type TA45-ABCWFC00U2

Upper class lathe Hand lathe steinert® maximo - ... the new upper class Detailed information on the The steinert® maximo hand lathe can be found at www.steinert.eu/maximo Click here for the latest pictures and videos When designing this machine, the aim was to achieve maximum stability, precision and safety for all areas of manual turning. Machining large workpieces usually causes forces that...

for wood lathe steinert® maximo Speed range 90-3200rpm in 3 stages (90-900 / 140-1400 / 320-3200rpm) With 3-stage adjustable soft start and brake chopper Right-left run 400v mains connection For machines with electronic speed control, 10-track poly V belt pulleys are installed The electronic control must be ordered together with the machine. Retrofitting at a later date is not possible or only possible...

for wood lathe steinert® maximo This is an additional option for the heavy stone lathe steinert maximo. The outboard turning device is supported against vibrations with 2 additional supports. The distance to the main machine is infinitely variable. The standard tool rest can be used on the cast iron bench bed of the outboard turning device. If the headstock is moved to the right, turning diameters of up to...

for wood lathe steinert® maximo Outdoor bed for lathe steinert® maximo

for lathe steinert® maximo and VGM300 This option for the steinert® maximo lathe must be ordered together with the machine Retrofitting at a later date is only possible with great effort

to be attached to an existing lathe The connection from the lathe spindle to the oval work is made with a universal joint coupling. The oval movement is suitable for oval shapes with a maximum axis difference of 80mm. It is permissible for a maximum mass of workpiece plus chuck of 5.0kg. The maximum distance from the rotating base plate of the oval mechanism to the tool contact point is 180mm for workpieces...

for long wood work on steinert® picOval oval lathe center punch with ball joint for long woodworking on steinert® picOval oval lathe

for long wood work on steinert® picOval oval lathe Driver with universal joint for long woodworking on steinert® picOval oval lathe

without wooden frame We offer the foot lathe kit as: (please select your preference) Kit without wooden parts Kit without wooden parts with flywheel The metal parts (screws, nails, crankshaft, tailstock quill etc.) are hand forged. The spindle is guided in white metal plain bearings. A counter-pressure bearing (back bearing) can be attached to the rear of the spindle. This enables stop work on...

Shank Ø 30/40mm Tool rest 180 mm with Shank Ø 30 / 40 mm

Shank Ø 30/40mm Tool rest 425 mm with Shank Ø 30 / 40 mm

2 x shaft Ø 30 or 40mm For long turned parts. Available with 2 x shank Ø 30 or 2 x shank Ø 40 mm. Please select.

Shank Ø 30 / 40mm Tool rest curved, Ø 150 mm, adjustable with shank Ø 30 / 40 mm

Shank Ø: 16, 20 mm or 1" When turning hollow forms, there is often a considerable overhang of the tool over the tool support which results in unfavourable leverage. This curved tool rest can be positioned so that it protrudes into the hollow mold. There are holes on the top of the curved tool support rail; these serve to accommodate an optionally available fork guide or a guide pin. A bar lying...