Woodturning machines

with individually adjustable rollers & swivelling body Clamping range Ø from approx. 18 mm to 220 mm The steady rest comes equipped with Blickle high-performance rollers. The standard design of the steady rest is for a bedway spacing of 80 mm. However, it can be adapted to different spacings. Please specify the bedway spacing of your lathe, and we will be happy to provide you with a quote.

made of aluminium Flat surface for attaching self-adhesive sanding pads for spindle thread M33x3.5

based on the table lathe steinert piccolo Vario Centre height over bench bed: 150mm Centre height over external turning device with optional underframe with pull-out external bed: 350mm Distance between centres in the starting position: 200mm Motor: 400v / 0.75kW Gearbox: 6-stage V-belt gear ( electronic speed control with 230 volt mains connection optional ) The oval gear halves the spindle speed! Maximum axis difference...

only for the Steinert® piccolo Vario lathe The rotating headstock is only compatible with the piccolo Vario, with a centre height of 180mm. Must be ordered with a machine. Retrofitting is not possible.

for the Steinert® piccolo lathe The centre height 180mm enables a maximum turning diameter of 360mm. Must be ordered with the machine. Retrofitting is not possible or only possible with great effort.

for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm

for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm

for wood lathe steinert® gamma and VGM300 For the front of the headstock Only for lathes of the steinert gamma type with rotating headstock and steinert VGM300 Diameters of up to 1,100mm are possible with this external turning device. The massive steel construction that accommodates the palm rest can also be retrofitted on older machines. Floor support included The standard tool rest of the machine including the...

for VB36 Smaller version of the bed with tailstock. This can be folded away in a few simple steps and without tools to ensure unhindered access to the workpiece remains Quill stroke: 100mm Centre height with short bench bed: 345mm Distance between centres with short bench bed: 610mm Further information, pictures, films and more can be found on the website www.vb36.com .

0.25 or 0.75ltr for VB36 Special oil mixture for the plain bearings of the VB36 Master Bowlturner Lathe.

for head lathe VB36 Filled with special hot bearing grease to lubricate the VB36 thrust bearings.

for head lathe VB36

Ø 140, 200, 250 or 320mm These face plates are screwed directly onto the bayonet flange of the machine. This eliminates the risk of accidental loosening. Face plates are available with Ø 140mm, 200mm, 250mm and 320mm. Please select size. The faceplate Ø 140mm is already part of the basic equipment for the VB36. The scope of delivery includes 3 collar screws.

for VB36 and VGM300 lathes Adapter for VB36 and VGM300 bayonet to chuck thread. Please select the desired thread. 3 collar screws are included in the scope of delivery.

for VB36 and VGM300 The faceplate Ø 75mm is 28mm wide 6 of the 12 drill holes are inclined and enable the workpiece to be screwed securely, even in end grain. This is particularly useful for vase-shaped workpieces In addition to the conventional function as a faceplate, a screw chuck insert and an eccentric clamp can also be attached With the help of screwed-in driver tips, the face plate can...

for VB36 and VGM300 Eccentric chucking spigot chucks are a safe way to clamp irregular wooden blanks or small components with holes. The principle is simple and ingenious: An off-centre drilled disc is attached to the end of a tenon. The disc is knurled around its circumference. A hole in the diameter of the tenon is drilled into the wooden blank. The blank is now placed on the eccentric chuck...

for VB36 and VGM300 This screw chuck insert is attached to the faceplate VB36 Ø 75mm. Länge: 38 mm Durchmesser: 16 mm für Bohrung: 12 mm

3/4" left-hand thread This vacuum rotary inlet (also rotary feedthrough) is specially designed for bowl lathe VB36 from year of construction, 2014. VB36 lathes from 2014 onwards have an internal left-hand thread 3/4" on the back of the spindle. The rotating lead-in is a very robust, safe and easy vacuum connection option. Speed: up to 3500 rpm

for head lathe VB36 The tool support rail 300mm is part of the basic equipment of the VB36. The various lengths are supplied with a Ø 40 mm shaft.

for VB36 Master Bowlturner Lathe The Bennison adapter enables easy adjustment of the tool support It is plugged onto the mounting shaft on the cantilever rail (Ø 60mm) and takes the shaft of the tool holder (Ø 40mm) The Bennison adapter is fixed into the desired position using a hand lever and a wedge mechanism It is part of the basic equipment of the VB36

for VB36 tool rest All VB36 tool supports are provided with threaded holes. This guide pin can be screwed horizontally into the threaded hole. It is very helpful for certain work to enable you to guide the tool more cleanly and precisely.

for Deep Hollowing Rest VB36 An accessory for the curved tool support rail of the VB36 Serves to guide the tool in deeply turned workpieces

for Deep Hollowing Rest VB36 An accessory for the curved tool support rail of the VB36 Serves to guide the tool in deeply turned workpieces

for Deep Hollowing Rest VB36 These additional palm rest bars can be used on the curved tool rest. They are useful when the hollow shape is to have a particularly small opening. In this case there is usually only a small amount of freedom of movement for the tool. With an eccentric attachment, this hand support rod can be fixed in such a way that the tool can be guided through a small workpiece opening...