Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 

Wood lathe - advice and purchase directly from the manufacturer

STEINERT® / HAPFO® / KILLINGER®

3 strong brands for woodturning lathes and woodturning machines

The joy of woodturning really gets going with a high-quality woodturning lathe. For this reason, we only offer machines and accessories of the highest quality. Whether the "small" bench lathe steinert® piccolo, the super-heavy hand lathes steinert® VGM300, gamma and maximo or the legendary bowl lathe steinert® VB36 Master Bowlturner Lathe, our selection of woodturning lathes is well thought out down to the last detail as well as precise and sturdy construction.

The lathes are manufactured in our own machine store steinert® Maschinenbau in Olbernhau. The versatile accessories and optional special fixtures also meet high demands. If you need support in assembling your individual machine, we will be pleased to advise you.

Steinert Turning Benches

Read more...
1 From 6
No results were found for the filter!
Tisch-Drechselbank steinert piccolo Super
Steinert® piccolo Super Table Lathe
Grey cast iron lathe Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile face turning and the amateur has a fully-fledged,...
€3,210.00 *
Details
Profi-Drechselbank steinert VGM300
Steinert® VGM300 Lathe
heavy professional turning lathe made of gray cast iron The new Steinert® VGM300 hand lathe is an essential for our three heavy machines V B36, G amma and M aximo. The wishes and experiences of turners who are looking for particularly solid and long-lasting turning technology made in Germany, have been incorporated into the development of this machine. A massive, torsion-resistant cast bench bed serves as the base frame, which...
€10,985.00 *
Details
Dechselbank HAPFO Performer 400-FU
HAPFO Performer 400-FU Lathe
Distance between centres 1000 mm, Max diameter over bed 800 mm Designed for the professional user, the PERFORMER 400-FU presents all technical advantages which are characteristic for an efficient wood turning lathe. With a centre height of 402mm, and the swiveling headstock there are all possibilities to realise extraordinary artwork. Characteristics: • Headstock can be swiveled and moved all over the bed • headstock made of cast iron •...
From €8,699.00 *
Details
VB36 Master Bowlturner Lathe (Schalen-Drechselbank)
Steinert® VB36
Master Bowlturner Lathe Further information, pictures, films and more can be found on the website www.vb36.com . The "VB36 Master Bowlturner Lathe" - that's the correct English name - has rightly earned the status of a cult machine in recent years. The unlimited access to the workpiece makes the lathe an ideal tool for making large bowls or vessels. Plain bearings ensure extremely smooth running....
Price on request
Details
Drechselbank Killinger KM1400SE mit Füßen
Killinger KM 1400 SE Lathe
Table model without feet The shipping costs specified in the shopping cart apply within Germany. For orders from abroad, we offer the actual shipping costs after receipt of the order. Please choose between a table model or a standing model with legs. The Killinger wood lathe KM1400 is our entry-level model in the mid-range price segment. The lathe impresses with its robust construction, high-quality...
From €1,999.00 *
Details
Steinert Gamma Drechselbank
Steinert® gamma 250/1010 Lathe
heavy hand lathe made of grey cast iron Centre height: 250mm Distance between centres: 1100mm Motor: 2,2 KW, 400v; 50 Hz (other motors with different power and voltage can be installed for a surcharge) Mains connection: 230v, 50 Hz Speeds in rpm: variable in 3 ranges from 70 to 3600 Headstock / spindle: grey cast iron with hollow spindle (bore 12 mm) with spindle thread M33 / DIN 800 and MK 2 inner cone, rotatable...
€9,525.00 *
Details
Drechselbank steinert maximo
Steinert® maximo Lathe
Upper class lathe Hand lathe steinert® maximo - ... the new upper class Detailed information on the The steinert® maximo hand lathe can be found at www.steinert.eu/maximo Click here for the latest pictures and videos When designing this machine, the aim was to achieve maximum stability, precision and safety for all areas of manual turning. Machining large workpieces usually causes forces that...
€12,990.00 *
Details
Fußdrechselbank nach historischem Vorbild
Foot Lathe Based on Historical Model
Complete machine fully assembled The foot lathe is manufactured in small series in the Ore Mountains based on the historical model. The metal parts (screws, nails, crankshaft, tailstock quill etc.) are hand forged. The spindle is guided in white metal plain bearings. A counter-pressure bearing (back bearing) is attached to the rear of the spindle. This enables stop work on the spindle without damaging the...
€3,990.00 *
Details
Drechselbank steinert piccolo SuperProfi
Steinert® piccolo SuperProfi Table Lathe
Grey cast iron lathe with back bearing Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to the solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile shuddering turning and the amateur has a...
€3,310.00 *
Details
Drechselbank steinert piccolo Vario
Steinert® piccolo Vario Table Lathe
Turning lathe made of grey cast iron with movable headstock Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile face turning, and the amateur has a fully-fledged,...
€3,420.00 *
Details
Zubehör des Killinger-Einsteiger-Sets
Woodturning Starter Set
Almost 25% savings compared to the individual prices! Scope of delivery of the starter set: Axminster SK100 lathe chuck, M33x3.5 Axminster jaws type A Axminster jaws type B Axminster jaws type C Axminster screw chuck attachment for type C jaws Axminster face plate ring for type C jaws Roughing gouge 19 mm Wiedemann HSS Spindle gouge 10 mm Wiedemann HSS Conical chisel 25 mm...
€589.00 * €731.60 *
Details
Oval-Drechselbank steinert picOval
steinert® picOval Oval Lathe
based on the table lathe steinert piccolo Vario Centre height over bench bed: 150mm Centre height over external turning device with optional underframe with pull-out external bed: 350mm Distance between centres in the starting position: 200mm Motor: 400v / 0.75kW Gearbox: 6-stage V-belt gear ( electronic speed control with 230 volt mains connection optional ) The oval gear halves the spindle speed! Maximum axis difference...
€4,799.00 *
Details
VB36 Master Bowlturner Lathe (Schalen-Drechselbank) mit kurzem Bankbett
Short Bed with Tailstock
for VB36 Smaller version of the bed with tailstock. This can be folded away in a few simple steps and without tools to ensure unhindered access to the workpiece remains Quill stroke: 100mm Carrier and moving centre point (MK3, Multistar) are included in the scope of delivery Centre height with short bench bed: 345mm Distance between centres with short bench bed: 610mm Further...
€1,850.00 *
Details
Drechselbank Killinger KM1450SE mit Füßen
Killinger KM 1450 SE Lathe
Table model without feet The shipping costs specified in the shopping cart apply within Germany. For orders from abroad, we offer the actual shipping costs after receipt of the order. Please choose between a table model or a standing model with legs. steinert® Killinger KM 1450 SE lathe, table model made of gray cast iron (feet optional), center height 200 mm, rotating and sliding headstock,...
From €2,899.00 *
Details
Woodturning Lathe Killinger KM 1500 SE
Killinger KM 1500 SE Lathe
Standing model with feet steinert® Killinger KM 1500 SE lathe, optionally available as a table model or usable without feet, 200 mm center height, rotating and sliding headstock, electronically adjustable spindle speed, motor 1.5 kW Technical data - Distance between centers: 1,100 mm, with bench bed extension 1,550 mm - Center height: 200 mm, with external turning device 330 mm - Headstock: gray...
€3,499.00 *
Details
Woodturning Lathe Killinger KM 3100 SE
Killinger KM 3100 SE Lathe
Standing model with feet The shipping costs specified in the shopping cart apply within Germany. For orders from abroad, we offer the actual shipping costs after receipt of the order. steinert® Killinger KM 3100 SE lathe, 280 mm center height, rotating and sliding headstock, electronically adjustable spindle speed, motor 2.2 kW Technical data - Distance between centers: 850 mm with 2 feet, 1,540 mm...
From €5,999.00 *
Details
Oval-Drechsel-Aufsatz picOval
steinert® picOval Oval Lathe Attachment
to be attached to an existing lathe The connection from the lathe spindle to the oval work is made with a universal joint coupling. The oval movement is suitable for oval shapes with a maximum axis difference of 80mm. It is permissible for a maximum mass of workpiece plus chuck of 5.0kg. The maximum distance from the rotating base plate of the oval mechanism to the tool contact point is 180mm for workpieces...
€3,700.00 *
Details
Einzelteile der historischen Fußdrehbank
Foot Lathe Kit
without wooden frame We offer the foot lathe kit as: (please select your preference) Kit without wooden parts Kit without wooden parts with flywheel The metal parts (screws, nails, crankshaft, tailstock quill etc.) are hand forged. The spindle is guided in white metal plain bearings. A counter-pressure bearing (back bearing) can be attached to the rear of the spindle. This enables stop work on...
From €1,790.00 *
Details
Centre Height 180mm with Rotating Headstock
Centre Height 180mm with Rotating Headstock
only for the Steinert® piccolo Vario lathe The rotating headstock is only compatible with the piccolo Vario, with a centre height of 180mm. Must be ordered with a machine. Retrofitting is not possible.
€169.00 *
Details
Hand-/Werkzeugauflage für Drechselbank steinert piccolo
Tool Support 120mm, Shaft 25mm
for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€59.00 *
Details
Hand-/Werkzeugauflage für Drechselbank steinert piccolo
Tool Support 160mm, Shaft 25mm
for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm This tool support is part of the standard equipment of the steinert® piccolo.
€59.00 *
Details
Lange Werkzeugauflage für Tischdrechselbank steinert piccolo
Tool Support 400mm inc. Second Lower Part
for the Steinert® piccolo lathe Shank diameter 2 x 25mm For centre height 150mm or 180mm Including second lower part
€265.00 *
Details
Handauflage gebogen
Curved Tool Support
for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm
€85.00 *
Details
Tischdrechselbank steinert piccolo Untergestell aus Holz
Wooden Base Frame
for the Steinert® piccolo lathe Solid wood glazed, carpentry work base. Demountable and very stable Length 114 cm x width 57 cm x height: 80 cm
From €349.00 *
Details
1 From 6

Woodturning lathes from standard to special design

In addition to the versatile standard woodturning lathes of the brand steinert®, which can be set up and converted, we also offer custom-made products for special requirements apart from woodturning.

The traditional brand hapfo®

In October 2020 we took over the company hapfo® Maschinenbau (in the meantime Fa. gh-tec) from Mindelheim. hapfo® manual lathes (Performer) and hapfo® automatic lathes (Challenge, 5000-CNC, 7000-CNC, 9500-CNC etc.) and copy lathes (HydroKing, 5000, 6000 etc.) are now produced in steinert® Maschinenbau.

Besides the production of new machines we are of course hapfo®-customers of the past 45 years of company history as a service partner.

The quality brand Killinger®

In January 2021, DRECHSELZENTRUM ERZGEBIRGE - steinert® and steinert® Maschinenbau have taken over the exclusive distribution for the entire lathe program of Killinger® Maschinen GmbH. In close cooperation with Killinger® we will take over the production, assembly, quality control and service and continue to maintain the long-standing relationships with Killinger® sales partners.

There will be no changes to the existing Killinger® machine and accessory range and the well-known quality of the machines. We will continue to offer everything from the small KM1400SE bench lathe to the large KM3100SE, from external turning devices to bench bed extensions.

Fully automatic machines for the industrial production of wood turned parts can be found here....

back to top...
Viewed