No results were found for the filter!
steinert® (Deutschland)
Steinert® VB36 Master Bowlturner Lathe Further information, pictures, films and more can be found on the website www.vb36.com . The "VB36 Master Bowlturner Lathe" - that's the correct English name - has rightly earned the status of a cult machine in recent years. The unlimited access to the workpiece makes the lathe an ideal tool for making large bowls or vessels. Plain bearings ensure extremely smooth running....
€15,990.00 *
steinert® (Deutschland)
Short Bed with Tailstock for VB36 Smaller version of the bed with tailstock. This can be folded away in a few simple steps and without tools to ensure unhindered access to the workpiece remains Quill stroke: 100mm Centre height with short bench bed: 345mm Distance between centres with short bench bed: 610mm Further information, pictures, films and more can be found on the website www.vb36.com .
€2,640.00 *
steinert® (Deutschland)
Deep Hollowing Rest for Bowl lathe VB36 Shank Ø: 40mm When turning hollow forms, there is often a considerable overhang of the tool over the tool support resulting in unfavorable leverage. This curved tool rest can be positioned so that it protrudes into the hollow mold. There are holes on the top of the curved tool support rail, these serve to accommodate an optionally available fork guide or a guide pin. A bar...
€319.00 *
steinert® (Deutschland)
Extra Deep Hollowing Rest for bowl lathe VB36 This extra-long tool rest for very deep vessels is adjustable on a grey cast iron mount. The massive steel rail is very stable and protrudes into the vessel. Outside of the workpiece, the handle of the turning tool can be guided on an additional external hand rest. Please note that the additional hand rest is not included in the scope of delivery and must be ordered...
From €659.00 *
steinert® (Deutschland)
Toolrest 130, 200, 300 or 400mm for head lathe VB36 The tool support rail 300mm is part of the basic equipment of the VB36.
From €95.00 *
steinert® (Deutschland)
VB LUBE Special Lubricant for VB36 0.25 or 0.75ltr for VB36 Special oil mixture for the plain bearings of the VB36 Master Bowlturner Lathe.
Content 0.25 Liter (€41.60 * / 1 Liter)
From €10.40 *
steinert® (Deutschland)
Gewindeadapter von Bajonett auf verschiedene Gewinde for head lathe VB36 Adapter für VB36-Bajonett auf Futter-Gewinde. Bitte wählen Sie das gewünschte Gewinde. Im Lieferumfang sind 3 Bundschrauben enthalten.
€129.00 *
steinert® (Deutschland)
Face Plate for VB36 & VGM300 Ø 140, 200, 250 or 320mm These face plates are screwed directly onto the bayonet flange of the machine. This eliminates the risk of accidental loosening. Face plates are available with Ø 140mm, 200mm, 250mm and 320mm. Please select size. The faceplate Ø 140mm is already part of the basic equipment for the VB36. The scope of delivery includes 3 collar screws.
From €69.00 *
steinert® (Deutschland)
Screw Chuck Insert for Face Plate Ø 75mm for VB36 and VGM300 This screw chuck insert is attached to the faceplate VB36 Ø 75mm. Länge: 38 mm Durchmesser: 16 mm für Bohrung: 12 mm
€44.50 *
steinert® (Deutschland)
Face Plate Ø 75mm for VB36 and VGM300 The faceplate Ø 75mm is 28mm wide 6 of the 12 drill holes are inclined and enable the workpiece to be screwed securely, even in end grain. This is particularly useful for vase-shaped workpieces In addition to the conventional function as a faceplate, a screw chuck insert and an eccentric clamp can also be attached With the help of screwed-in driver tips, the face plate can...
€140.00 *
steinert® (Deutschland)
Forked Rest for Extra Deep Hollowing Rest VB36 Accessories for the extra-long tool rest of the VB36 Serves to guide the tool into deeply turned workpieces
€34.00 *
steinert® (Deutschland)
Short Fulcrum Pin for Extra Deep Hollowing Rest VB36 Accessories for the extra-long tool rest of the VB36 Serves to guide the tool into deeply turned workpieces
€13.00 *
steinert® (Deutschland)
Free Standing Toolrest for head lathe VB36 If workpieces with a diameter of more than 915 mm (largest possible diameter above cantilever rail) are to be machined on the VB36, this free-standing tool support stand must be used. It is suitable for all tool supports of the VB36. The diameter of the mount is 40mm The head lathe VB36 was manufactured in 2 different heights in the past - "L" (low) and "H" (high). Since...
€559.00 *
steinert® (Deutschland)
Forked Rest for Deep Hollowing Rest VB36 An accessory for the curved tool support rail of the VB36 Serves to guide the tool in deeply turned workpieces
€29.00 *
steinert® (Deutschland)
Melvyn Firmager Guide Pin for VB36 tool supports All VB36 tool supports are provided with threaded holes. This guide pin can be screwed horizontally into the threaded hole. It is very helpful for certain work to enable you to guide the tool more cleanly and precisely.
€12.00 *
steinert® (Deutschland)
Eccentric Clamp for Face Plate Ø 75mm for VB36 and VGM300 Eccentric chucking spigot chucks are a safe way to clamp irregular wooden blanks or small components with holes. The principle is simple and ingenious: An off-centre drilled disc is attached to the end of a tenon. The disc is knurled around its circumference. A hole in the diameter of the tenon is drilled into the wooden blank. The blank is now placed on the eccentric chuck...
€69.00 *
steinert® (Deutschland)
Short Fulcrum Pin for Deep Hollowing Rest VB36 An accessory for the curved tool support rail of the VB36 Serves to guide the tool in deeply turned workpieces
€12.00 *
steinert® (Deutschland)
Large Eccentric bar 200 x Ø 20 mm for Deep Hollowing Rest VB36 These additional palm rest bars can be used on the curved tool rest. They are useful when the hollow shape is to have a particularly small opening. In this case there is usually only a small amount of freedom of movement for the tool. With an eccentric attachment, this hand support rod can be fixed in such a way that the tool can be guided through a small workpiece opening...
€39.00 *
steinert® (Deutschland)
Handrest for Extra Deep Hollowing Rest VB36 This hand rest is an accessory for the extra long tool rest. It can also be used individually as a tool rest protruding into the vessel. Shank (Ø 40mm, length approx. 250mm) with Ø 30mm hole for bracket Extension arm (Ø 30mm, length approx. 350mm) Clamping lever
€139.00 *
steinert® (Deutschland)
Back Rest for positioning behind the turner This T-shaped support is inserted into the free-standing tool support stand. It serves as an additional tool support behind the turner for particularly long boring tools. This allows the horizontal bearing of the tool to be checked.
€125.00 *
for head lathe VB36 Filled with special hot bearing grease to lubricate the VB36 thrust bearings.
€39.40 *
steinert® (Deutschland)
Bennison Adapter for VB36 Master Bowlturner Lathe The Bennison adapter enables easy adjustment of the tool support It is plugged onto the mounting shaft on the cantilever rail (Ø 60mm) and takes the shaft of the tool holder (Ø 40mm) The Bennison adapter is fixed into the desired position using a hand lever and a wedge mechanism It is part of the basic equipment of the VB36
€319.00 *
Rotoflux (Italien)
Rotary Vacuum Inlet for VB36 (2014) 3/4" left-hand thread This vacuum rotary inlet (also rotary feedthrough) is specially designed for bowl lathe VB36 from year of construction, 2014. VB36 lathes from 2014 onwards have an internal left-hand thread 3/4" on the back of the spindle. The rotating lead-in is a very robust, safe and easy vacuum connection option.
€230.00 *
You have last looked at the following articles: