Table model or floor model Killinger KM1450SE wood lathe Enjoys great popularity among beginners and hobby woodturners and is our perennial favorite in the medium price segment. It has found its place in professional woodturning shops in the Erzgebirge. This hobby woodturning machine offers all the technical features you would expect from a woodturning lathe. The Killinger brand stands for quality and...

heavy professional turning lathe made of gray cast iron The new Steinert® VGM300 hand lathe is an essential for our three heavy machines V B36, G amma and M aximo. The wishes and experiences of turners who are looking for particularly solid and long-lasting turning technology made in Germany, have been incorporated into the development of this machine. A massive, torsion-resistant cast bench bed serves as the base frame, which...

CNC-controlled fully automatic machine for turned parts up to 65mm The steinert® Minimat 65 CNC is a fully automatic machine for the series production of turned wood parts up to a diameter of 65mm. The WEMA Minimat 65 CNC is characterised by its high level of economy, both for large series and for smaller batch sizes. Even single pieces and samples can be produced inexpensively and quickly. The supports are programmed using a CAD / CAM...

Master Bowlturner Lathe Further information, pictures, films and more can be found on the website www.vb36.com . The "VB36 Master Bowlturner Lathe" - that's the correct English name - has rightly earned the status of a cult machine in recent years. The unlimited access to the workpiece makes the lathe an ideal tool for making large bowls or vessels. Plain bearings ensure extremely smooth running....

Grey cast iron lathe Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile face turning and the amateur has a fully-fledged,...

Fully automatic machine for turned parts up to Ø 25mm The steinert minimat 25 is a fully automatic lathe for mass production of turned wood parts up to a diameter of 25 mm. The machine is equipped with two pneumatically controlled turning supports, a pneumatically controlled drilling support and a pneumatically parting support. Both turning supports, one is designed to pivot, can be equipped with form cutting tools. The...

Universal drive for individual use in industry and trade. The device is equipped with a standard spindle thread M33x3.5 and an inner cone MK2 and can be equipped with a variety of clamping devices for different applications. 3-stage belt transmission Spindle thread M33x3.5 Inner cone MK2 Hollow shaft Ø 11mm Axle height 160mm Aluminium base plate 350 x 440 x 10mm Motor 400v,...

Machine for sharpening steel tools for copy lathes. Motor power: 0.25 KW Speed: 2830 rpm Inc. cup wheel Ø 100mm

Complete machine fully assembled The foot lathe is manufactured in small series in the Ore Mountains based on the historical model. The metal parts (screws, nails, crankshaft, tailstock quill etc.) are hand forged. The spindle is guided in white metal plain bearings. A counter-pressure bearing (back bearing) is attached to the rear of the spindle. This enables stop work on the spindle without damaging the...

Shank-Ø: 30 or 40 mm When turning hollow forms, there is often a considerable overhang of the tool over the tool rest resulting in unfavorable leverage. This curved tool rest can be positioned so that it protrudes into the hollow mold. There are holes on the top of the curved tool rest rail, these serve to accommodate an optionally available fork guide or a guide pin. A bar lying horizontally...

Inside Ø 25, 30, 32, 40 or 60 mm Please select the desired inner Ø! The adjusting ring can be used to set the desired working height of the tool rest. It thus serves to make work easier. These set collars are equipped with a grub screw with a conical dome. This prevents marks in the shaft, which can occur with pointed grub screws.

for the steinert® piccolo lathe and other makes For insertion into the lower part of the hand rest Travel path 190mm, depth stop on both sides Maintenance-free adjustable special guide Shaft Ø 25mm with milled anti-twist device Height adjustment via adjusting ring Euro mount 43mm Upper slide rotatable for milling work Milling Motor and lower part of the hand rest not included The Metabo Milling Motor FME737 is compatible...

Shank 30/40mm, centre height 200/250/300mm Tool rest curved, Ø 220 mm with Shank Ø 30 / 40 mm

heavy hand lathe made of grey cast iron The offer price is only valid until 31.08.2023 and for a maximum of 3 pieces. Centre height: 250mm Distance between centres: 1100mm Motor: 2,2 KW, 400v; 50 Hz (other motors with different power and voltage can be installed for a surcharge) Mains connection: 230v, 50 Hz Speeds in rpm: variable in 3 ranges from 70 to 3600 Headstock / spindle: grey cast iron with hollow spindle...

Grey cast iron lathe with back bearing Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to the solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile shuddering turning and the amateur has a...

Turning lathe made of grey cast iron with movable headstock Hand lathes of the “steinert® piccolo” series are made of grey cast iron and thus correspond in their basic construction to solid professional lathes. As table lathes, they are only smaller than the standing machines; however, their areas of application are unlimited. The professional uses it in his workshop or for mobile face turning, and the amateur has a fully-fledged,...

for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm This tool rest is part of the standard equipment of the steinert® piccolo.

for the Steinert® piccolo lathe Shank diameter 2 x 25mm For centre height 150mm or 180mm Including second lower part

for the Steinert® piccolo lathe and other makes For centre heights 150mm to 180mm Shank diameter 25mm

for the Steinert® piccolo lathe The bench bed extension consists of a second grey cast iron bench bed, which is precisely adapted to the machine. This results in a tip width of 1000mm. The extension can be removed if necessary. The extension must be ordered with the machine. Later retrofitting is only possible with great effort. *The long tool support rail in Figure 2 is not part of the bench bed extension.

for the Steinert® piccolo lathe Solid wood glazed, carpentry work base. Demountable and very stable Length 114 cm x width 57 cm x height: 80 cm

For wood lathe steinert® piccolo from year of construction 2017 In contrast to the standard quill, this sliding quill has a longer quill stroke of 120 mm and lever feed instead of the handwheel. Such a design, also known as a drill quill, is suitable if a lot of drilling is to be carried out. This is useful, for example, in the manufacture of writing implements. Deep holes can be drilled “in one go” without having to reposition the...

for the steinert® piccolo lathe and other makes With individually adjustable rollers, swiveling Possible to adapt to other makes of lathe

for the Steinert® piccolo lathe and other makes Dimensions: 200 x 120 mm