Prices incl. VAT plus shipping costs
only 1 in stock available immediately
- Order number: km1500se-2
Killinger - Woodturning lathe kit
The KM1500SE model is supplied as a kit in individual parts. You assemble the machine according to the instructions and save 200 €. The machine is supplied in 3 pre-assembled assemblies, which make up a complete machine in just a few steps. In addition to the price advantage, transportation to the installation site is also considerably simplified.
KM1500SE woodturning lathe
The Killinger KM1500SE woodturning lathe is the big brother of our KM1450SE. The machine has the same technical features, but has been adapted in some areas to meet the wishes of our customers.
With a center width of 1100 mm, significantly larger projects can be turned. The design is based on the large KM3100SE machine. The lathe is firmly bolted to a wide steel construction. These heavy steel feet in combination with a longer bench bed provide additional weight. Turning utensils can be stored in the mounted storage tray. The frequency converter is mounted inside the feet to protect it from impact and dust.
In summary, the Killinger KM1500SE woodturning lathe offers state-of-the-art technical features and the robust construction you would expect from a professional woodturning machine.
Accessories included in the scope of delivery:
- rotating center point MK2; 60°
- four-point driver MK2; Ø 24 mm
- lower cast iron tool rest with eccentric clamp; shaft 30 mm
- upper cast iron tool rest 350 mm; shaft 30 mm
- adjusting screws, adjusting plates and rubber plates for optional feet
- box for frequency converter
- storage tray with rubber mat
- EURO ASR anti-drain ring
Optional, retrofittable accessories
- External turning device
- Bench bed extension 450 mm
The motor shown in the pictures has been replaced by another motor. Current machine photos will be added with the next photo shoot.
Technical Data | |
Manufacturer: | Steinert Maschinenbau |
Center height: | 200 mm |
Distance between centres: | 1100 mm |
Distance between centres with bench extension: | 1550 mm |
Turning diameter over tool rest: | 295 mm |
Motor: | 1.5 kW, 230/400 V, 50 Hz |
RPM range: | 40 - 3,025 rpm, 40 - 850 rpm, 40 - 1,650 rpm |
Belt pulleys: | 3 |
Dividing device: | 36-step |
Speed control: | electronic, stepless |
Forward/Reverse: | yes |
Headstock: | rotatable and movable |
Headstock (material): | Cast iron |
Spindle thread: | M33 x 3.5 mm - DIN 800 |
Spindle taper: | Morse taper MT2 |
Reverse Locking: | ASR |
Tailstock (material): | Cast iron |
Tailstock taper: | Morse taper MT2 |
Quill scale: | 100 mm with dimensional scale |
Bench bed (material): | Cast iron |
Bench bed width: | 175 mm |
Bench bed length: | 1475 mm |
Tool rest (material): | Cast iron |
Tool support shank-Ø: | 30 mm |
Feet (material): | Steel construction |
Mobile control box: | yes, magnetic |
Mains connection: | 230 Volt, 50 Hz |
Special features : | Tip to tip locking |
Others: | two 230 volt sockets |
Dimensions L x W x H: | 195 x 60 x 125 cm |
Weight floor model: | 240 kg (incl. feet) |
Manufacturer warranty: | 5 years |