ONEWAY "Easy-Core" Base Substructure 16, 18, 20, 22, 24 or 26"

The substructure for the "Easy-Core" bowl cutter from ONEWAY is attached to the machine bed instead of the hand rest. It takes a shaft for the knife and another shaft for the support rail. The substructure is available for centre heights of 200, 230, 250, 300 and 330mm. Please select the height that suits your machine.

The exact centre height can be adjusted with an adjusting screw in the underside of the knife set. This means that the substructures can also be adjusted to machines with a similar centre height. The following peak heights are possible with the standard substructures:

For machines with tip heights that are not listed here, we offer an elevation set. This opens up further possibilities.
A clamping plate is required to attach the basic substructure. This must be selected to match the distance between the bench bed and the cheeks and ordered separately.
The scope of delivery of the substructure includes the tool handle for the knife sets and an instruction DVD (English).

For the initial equipment of the ONEWAY Easy Core you need:

• ONEWAY "Easy-Core" knife set Knife set of your choice
• ONEWAY "Easy-Core" base substructure depending on the centre height of the lathe
• Possibly increasing set for ONEWAY "Easy-Core" base substructure depending on the centre height of the lathe
• ONEWAY "Easy-Core" clamping plate depending on the bench bed geometry of the lathe