Prices incl. VAT plus shipping costs
more than 50 in stock available immediately
Prices incl. VAT plus shipping costs
Order within4 hours and 34 minutes this and other products.
- Order number: 060770
- Kit for the manufacture of bottle openers / bottle openers / crown cork openers.
- Very easy to manufacture and varied.
- Made in Germany.
Scope of delivery:
- Metal part of the bottle opener (stainless steel) and hanger bolt.
Data:
- Material: stainless steel (stainless steel), material no .: 14305
- Dimensions of the metal part: length 45mm, Ø 12mm, thread M8
- Dimensions hanger bolt: length 50mm , Thread M8, hexagon socket T25, hexagon socket SW6
- Hole for the hanger bolt: 6.5mm (see note below)
- Length of the wooden or plastic blank (not included): as desired, approx. 100mm recommended
- Weight of the kit: approx. 37g
Download construction manual (Ver. 1.0) click here (PDF)
Note on the recommended bore diameter: The outer diameter of the hanger bolt is 7.0mm (approx. 5.5mm core diameter). This results in only 0.25mm of engagement of the threads in the wood. With handles made of long wood this usually results in sufficient strength. A smaller hole would only lead to a high expenditure of force when screwing in. In the case of handles made of transverse wood, the hanger bolt can cause the wood to tear if the holes are drilled and the strength is usually sufficient. With different types of wood or, for example, with bush-hammered wood, it may be necessary to select a smaller hole diameter (6.0mm). In the case of high-quality wood, it is advisable to carry out a test with a leftover piece to see whether the hanger bolt holds and the wood does not tear open or tear.
Schönes Design
Der Kapselheber-Bausatz ist in Funktion und Design absolut top. Die "Bauanleitung" ist leicht verständlich. Die schlanke Ausführung wirkt modern und zeitlos. Ein gern gesehenes Give-Away.
Funktioniert wunderbar, schönes Design
Hatte bisher bei der Funktion keine Probleme, wird von der Kundschaft gerne gekauft, weil das Design sehr schlicht, schlank und modern wirkt.
Funktioniert nicht
Der Kapselheber funktioniert nicht. Kurz vor dem kompletten abheben des Kronkorkens rutscht er ab. Mann muss ihn mit der Feile nachbearbeiten, damit er etwas aggressiver greift und der Kronkorken abgehoben werden kann.
Vielen Dank für das Feedback. "Funktioniert nicht" kann man aber pauschal nicht sagen. Es gibt Unterschiede im Abstand der Zacken bei verschiedenen Kronkorken und der Glasgeometrie unterhalb der Kronkorken. Bei manchen Typen rutscht der Kapselheber tatsächlich u.U. durch. Der Hersteller hat diesbezüglich schon viel experimentiert und getestet, allerdings gehen andere Formen des „Mauls“ stark zu Lasten des Designs. Größtenteils sind die Kunden sehr zufrieden. Bei vielen tausend gelieferten Kapselhebern hatten wir bislang nur zwei vergleichbare Reklamationen.


