Neuhammer Flat Chisel Conical (Forged)

different sizes

€76.50 *

Prices incl. VAT plus shipping costs

only 4 in stock available immediately

more likely to be available 03.02.2023

Voraussichtlicher Versand Freitag, 09.12.2022

size:

  • 00304401
Please select the desired tool length (steel length) and cutting edge width. Please note... more
Product information "Neuhammer Flat Chisel Conical (Forged)"

Please select the desired tool length (steel length) and cutting edge width.

Please note that the hand-forged tools of the brand "Neuhammer" are delivered without a handle.
Compared to industrially manufactured mass products, it should be noted that dimensions and shape show slight fluctuations, which are due to the manufacturing technology of the artisanal forging. In addition, the shape and sharpness of the cutting edge are not yet ready for use with new tools. All tools must first be sharpened; this enables the shape of the cutting edge to be corrected according to individual requirements (influencing factors such as type of wood, workpiece shape and the like).

Application: The chisel, regionally also called flat iron, is one of the most important tools of the woodturner when turning long wood. Once the square timber has been turned round with the roughing gouge and the approximate dimensions of the roll to be achieved have been reached, work with the chisel is continued. It is used for form and smooth turning (finishing) and for grooving and parting off. Conical shapes (so-called half or quarter rods) and almost all conical shapes can be produced with the chisel. There are chisels in conical and straight shapes. The straight shapes are advisable for narrow chisels (up to approx. 20mm), as well as for very wide chisels (50-70mm). The conical chisels have proven themselves for strong profiles because they can be guided more flexibly on the hand rest rail.

Sharpening: The chisel is sharpened at an angle from two sides to the cutting edge. It is important that the chamfers are the same size on both sides. The wedge angle depends on the hardness, density and the rest of the nature of the wood and the profiles to be executed. The incline of the cutting edge depends on the woodturner's habits and how he guides his tool on the support. It is around 45°.

Working method: Elongated surfaces and curves are cut with the lower half of the cutting edge. The "beard" (obtuse-angled lower cutting corner) is used for turning short curves and notches. The "point" (acute-angled upper cutting corner) is used for grooving and parting.

Application examples: column-shaped workpieces such as handrails, furniture legs, figures, writing implements, handles, etc.

Related links to "Neuhammer Flat Chisel Conical (Forged)"
Read, write and discuss reviews... more
Customer evaluation for "Neuhammer Flat Chisel Conical (Forged)"
6 Oct 2022

Macht richtig Freude

Der konische Flachmeißel von Neuhammer macht richtig Freude. Ausgewogenheit und Gewicht ermöglichen ein ruhiges und gut überschaubares Arbeiten. Ich habe dem Meißel einen Griff gedrechselt, wie er bei alten Schraubenziehern zu finden ist. Der hintere runde Teil ist an beiden Seiten abgeflacht, was eine gute gefühlte Kontrolle gewährleistet und damit Sicherheit beim Arbeiten. Damit spürt man jegliche Winkeländerung beim Arbeiten sofort. Ich schleife ihn per Hand auf einem ganz normalen, herkömmlichen Schleifstein ( grob/fein). Und wenn ich Lust habe, dann noch auf japanischen Schleifsteinen, die von der Konsistenz eher einem sehr harten Radiergummi gleichen..

Es ist auch hier wie bei anderen Werkzeugen, man muß sich damit vertraut machen und die Handhabung üben. Bei kleineren Sachen ist auch der kleine Meißel aus meinem Kirschen Anfängerset gut zu gebrauchen...

Admin 6 Oct 2022

Danke für ihre Bewertung. Wir garantieren ihnen noch langanhaltende Freude mit dem geschmiedeten Stahl. Das Werkzeug hat seinen Preis, die Qualität und die Lebensdauer sprechen aber für sich. Viele Grüße aus dem Drechselzentrum

 

Write an evaluation
Um eine Bewertung abgeben zu können, müssen Sie sich zunächst anmelden.
steinert Schleifscheiben mit Velcro Klettbelag steinert® Grinding Disc (20pcs) Ø 50mm
Content 20 Stück (€0.28 * / 1 Stück)
From €5.50 *
Hermes Schleifleinen in verschiedenen Körnungen, 5- und 50-Meter-Rollen Abrasive Cloth 5m, Width 100mm
Content 5 Meter (€2.79 * / 1 Meter)
From €13.95 *
steinert® Drechsleröl steinert® Turner Oil 0.25L
Content 0.25 Liter (€35.20 * / 1 Liter)
€8.80 *
steinert® Drechsleröl weiß steinert® Turner Oil White 0.25L
Content 0.25 Liter (€37.60 * / 1 Liter)
€9.40 *
steinert® Drechsleröl steinert® Wood Turner Oil 0.75L
Content 0.75 Liter (€29.20 * / 1 Liter)
€21.90 *
steinert Schleifscheiben mit Velcro Klettbelag steinert® Grinding Disc (20pcs) Ø 75mm
Content 20 Stück (€0.40 * / 1 Stück)
From €7.90 *
Faßpech klar Piering Barrel Pitch, Transparent, 500g
Content 0.5 Kilogramm (€25.90 * / 1 Kilogramm)
€12.95 *
steinert Drechslerwachs steinert® Wood Turner's Wax 0.125Ltr. (Colourless)
Content 0.125 Liter (€77.60 * / 1 Liter)
€9.70 *
Silbergleit Trocken-Gleitmittel Silbergleit 250ml
Content 0.25 Liter (€39.80 * / 1 Liter)
€9.95 *
Ballistol Universalöl 50 ml Ballistol Universal Oil Spray
Content 0.05 Liter (€86.00 * / 1 Liter)
From €4.30 *
Einsteckzapfen Morsekegel (MK) auf Bohrfutterkegel (B) Insertion Pin MK2
From €11.95 *
Robert Sorby Drechselwerkzeug Ovalmeißel Oval Chisel
From €53.90 *
Schaber gerade (Diamic) 38 mm Schaber gerade (Diamic) 38 mm
€89.00 * €107.00 *
Zubehör des Killinger-Einsteiger-Sets Woodturning Starter Set
€589.00 * €816.09 *
Gratis Lieferung bis 31.12.22
Propolistur 250 ml Propolistur 250 ml
€18.00 * €20.11 *
Box Hollower 803H Box Hollower 803H
€40.00 * €50.00 *
Mushroom Tool - Pilzwerkzeug Mushroom Tool - Pilzwerkzeug
€45.00 * €50.00 *
NEW
Renaissance Wachs Renaissance Wachs
From €10.00 * €11.50 *
Viewed